C100A Mercury Code - Brake Pedal Angle Sensor Signal
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Brake Pedal Angle Sensor. Common causes include Faulty Brake Pedal Angle Sensor, Brake Pedal Angle Sensor harness is open or shorted, Brake Pedal Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C100A Mercury indicates Brake Pedal Angle Sensor Signal.
- Common causes
- Common causes include Faulty Brake Pedal Angle Sensor, Brake Pedal Angle Sensor harness is open or shorted, Brake Pedal Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C100A Mercury Description
What are the Possible Causes of the DTC C100A Mercury?
- Faulty Brake Pedal Angle Sensor
- Brake Pedal Angle Sensor harness is open or shorted
- Brake Pedal Angle Sensor circuit poor electrical connection
How to Fix the DTC C100A Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
C100A:41 Brake Pedal Angle Sensor: General Checksum Failure
C100A:62 Brake Pedal Angle Sensor: Signal Compare Failure
C100A:64 Brake Pedal Angle Sensor: Signal Plausibility Failure
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C100A Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C100A Mercury code?
Need more information on how to fix the C100A Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C100A Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C100A Mercury Code
What does the OBDII code C100A mean for a Mercury vehicle?
The OBDII code C100A indicates a problem with the Brake Pedal Angle Sensor signal, which is responsible for monitoring the position of the brake pedal.
What are the common symptoms associated with the C100A code?
Common symptoms include an illuminated check engine light, issues with brake responsiveness, or problems with the vehicle's stability control systems.
What can cause the C100A code to trigger?
The C100A code can be triggered by a faulty brake pedal angle sensor, wiring issues, poor connections, or problems within the vehicle's braking system.
How can I diagnose the C100A code?
To diagnose the C100A code, use an OBDII scanner to confirm the code, inspect the brake pedal angle sensor and its wiring for damage, and check for any related codes.
Is it safe to drive with the C100A code active?
It is not recommended to drive with the C100A code active, as it may affect braking performance and stability control, potentially leading to unsafe driving conditions.
What repairs are typically needed to fix the C100A code?
Repairs may include replacing the brake pedal angle sensor, repairing or replacing damaged wiring, or addressing any related issues in the braking system.
Can I reset the C100A code without fixing the issue?
While you can reset the code using an OBDII scanner, it is not advised to do so without addressing the underlying issue, as the code will likely reappear.
How much does it typically cost to repair the C100A code?
Repair costs can vary widely based on the specific issue but may range from $100 to $400, depending on whether you need to replace the sensor or repair wiring.
What should I do if the C100A code keeps coming back after repairs?
If the C100A code persists after repairs, further diagnostics may be necessary to check for other underlying issues, such as faulty modules or persistent wiring problems.
Discuss the causes and fixes for C100A Mercury OBDII Code
Code C100A Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
