C1000 Dodge Code - Brake Pedal Switch 1 Circuit Performance
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Primary Brake Switch Signal Circuit Brake Lamp Switch Output Circuit for three minutes once the set conditions have been met. Common causes include Faulty Brake Pedal Switch 1, Brake Pedal Switch 1 harness is open or shorted, Brake Pedal Switch 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1000 Dodge indicates Brake Pedal Switch 1 Circuit Performance.
- Common causes
- Common causes include Faulty Brake Pedal Switch 1, Brake Pedal Switch 1 harness is open or shorted, Brake Pedal Switch 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1000 Dodge Description
What are the Possible Causes of the DTC C1000 Dodge?
- Faulty Brake Pedal Switch 1
- Brake Pedal Switch 1 harness is open or shorted
- Brake Pedal Switch 1 circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC C1000 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1000 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1000 Dodge code?
Need more information on how to fix the C1000 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1000 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1000 Dodge Code
1. What does the OBDII code C1000 mean on a Dodge vehicle?
C1000 indicates a performance issue in the Brake Pedal Switch 1 Circuit, which monitors the brake pedal's position and operation.
2. What are the common symptoms of the C1000 code?
Symptoms may include the brake lights not functioning properly, difficulty shifting out of park, or warning lights on the dashboard.
3. What causes the C1000 Brake Pedal Switch 1 Circuit Performance code?
Causes can include a faulty brake pedal switch, damaged wiring or connectors, or issues with the brake light circuit.
4. Can the C1000 code affect vehicle safety?
Yes, the code can impact brake light functionality, which is essential for alerting other drivers and ensuring safe operation.
5. How can I diagnose the C1000 code on my Dodge?
Use an OBDII scanner to confirm the code, then inspect the brake pedal switch, wiring, connectors, and related circuits for damage or wear.
6. Can I drive my Dodge with the C1000 code active?
It’s not recommended, as brake light failure can increase the risk of accidents and potentially affect other vehicle systems.
7. How do I fix the C1000 code?
Repair steps may include replacing the brake pedal switch, repairing damaged wiring or connectors, or ensuring proper circuit connections.
8. How much does it cost to fix the C1000 code?
Repair costs vary but typically range from $50 to $150 for parts and labor, depending on the extent of the issue.
9. How do I prevent the C1000 code from recurring?
Regular inspections of the brake pedal switch, wiring, and connectors can help prevent this code from recurring.
10. Will clearing the C1000 code solve the problem?
Clearing the code will not fix the underlying issue; you must address the root cause for a permanent solution.
Discuss the causes and fixes for C1000 Dodge OBDII Code
-
I'm getting the C1000 and U0401 (Implausible Data Received From ECM/PCM) code. Symptoms are trailer brake disconnected dash warning (so far with no trailer attached), CF code on trailer brake controller, ESM malfunction indicator is lit, and if I am using cruise control it turns off. And, if I am reading the above correctly, my stop lamps are disabled. I was not aware of this until now. I replaced my brake switch with a non-OEM unit and although it did seem to help I still have the issue.
-
Let me check if I can find more information for your problem, what model and year is your Dodge?
-
The switch is by far the most common problem that will set the C1000 code. First, please double check the new switch is the same as the old switch. Same number of pins. If the brake checks OK, the next step is to check the Trailer Brake Connector. Check for rusted or bent pins on the connector and check the connector plug.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
