C0765 2018 GMC Sierra Code - Right Rear Low Tire Pressure Sensor
Quick Answer
The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Right Rear Low Tire Pressure Sensor, Right Rear Low Tire Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0765 2018 GMC Sierra indicates Right Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Right Rear Low Tire Pressure Sensor, Right Rear Low Tire Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0765 2018 GMC Sierra Description
What are the Possible Causes of the DTC C0765 2018 GMC Sierra?
- Perform the Tire Pressure Indicator Sensor Learn
- Faulty Right Rear Low Tire Pressure Sensor
- Right Rear Low Tire Pressure Sensor harness is open or shorted
- Right Rear Low Tire Pressure Sensor circuit poor electrical connection
How to Fix the DTC C0765 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0765 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0765 2018 GMC Sierra code?
Need more information on how to fix the C0765 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0765 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0765 2018 GMC Sierra Code
1. What does OBDII code C0765 on a 2018 GMC Sierra indicate?
The OBDII code C0765 specifically pertains to the Right Rear Low Tire Pressure Sensor on a 2018 GMC Sierra.
2. How can I identify if the Right Rear Low Tire Pressure Sensor is faulty?
Common symptoms of a faulty Right Rear Low Tire Pressure Sensor include inaccurate tire pressure readings, warning lights on the dashboard, or a persistent low tire pressure message.
3. What are some possible causes of the C0765 OBDII code on a 2018 GMC Sierra?
The C0765 code is often triggered by issues such as a malfunctioning tire pressure sensor, damaged wiring or connectors, low tire pressure in the right rear tire, or a faulty tire pressure monitoring system module.
4. Can I still drive my 2018 GMC Sierra with the C0765 code triggered?
It is generally safe to drive with the C0765 code triggered, but it is recommended to address the issue promptly to ensure accurate tire pressure monitoring for optimal safety and performance.
5. How can I troubleshoot and repair the Right Rear Low Tire Pressure Sensor issue on my 2018 GMC Sierra?
To troubleshoot and repair the C0765 code, start by checking the tire pressure in the right rear tire, inspecting the sensor and its connections for any visible damage, and using a diagnostic tool to reset the system or replace the faulty sensor if necessary.
6. Is it possible to reset the C0765 code on a 2018 GMC Sierra without professional help?
Yes, you can attempt to reset the C0765 code by using an OBDII scanner to clear the fault codes. However, if the issue persists, it is recommended to seek professional assistance for a thorough diagnosis and repair.
7. How much does it typically cost to repair the Right Rear Low Tire Pressure Sensor on a 2018 GMC Sierra?
The cost of repairing the Right Rear Low Tire Pressure Sensor can vary depending on the extent of the issue and whether you choose to replace the sensor yourself or have it done by a professional. Costs can range from around $50 for a DIY sensor replacement to over $200 for professional repairs.
8. Are there any DIY tips for addressing the C0765 code on a 2018 GMC Sierra?
DIY tips for addressing the C0765 code include checking the tire pressure, inspecting the sensor and wiring for damage, ensuring proper connections, and using an OBDII scanner to clear the fault codes. If unsure, it's best to consult a professional mechanic.
9. Can the C0765 code on a 2018 GMC Sierra cause any other issues besides the tire pressure sensor malfunction?
While the C0765 code primarily indicates a Right Rear Low Tire Pressure Sensor issue, ignoring the problem could lead to inaccurate tire pressure readings, potential safety hazards, and increased fuel consumption due to improper tire pressure maintenance.
10. How often should I check and maintain the tire pressure sensors on my 2018 GMC Sierra to prevent C0765 code recurrence?
It is recommended to regularly check and maintain the tire pressure sensors on your 2018 GMC Sierra as part of routine vehicle maintenance. Checking monthly or before long trips can help prevent issues like the C0765 code from occurring and ensure optimal tire performance and safety.
Discuss the causes and fixes for C0765 2018 GMC Sierra OBDII Code
Code C0765 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.