C0760 Buick Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 Buick indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0760 Buick Description
What are the Possible Causes of the DTC C0760 Buick?
- Perform the Tire Pressure Indicator Sensor Learn
- Faulty Left Rear Low Tire Pressure Sensor
- Left Rear Low Tire Pressure Sensor harness is open or shorted
- Left Rear Low Tire Pressure Sensor circuit poor electrical connection
How to Fix the DTC C0760 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0760 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0760 Buick code?
Need more information on how to fix the C0760 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 Buick Code
1. What does the OBDII code C0760 mean on a Buick?
Code C0760 indicates an issue with the left rear tire pressure sensor, typically caused by low tire pressure or a malfunctioning sensor.
2. What are common symptoms of code C0760 on a Buick?
Common symptoms include the tire pressure warning light on the dashboard, inaccurate tire pressure readings, or no reading from the left rear tire sensor.
3. What causes the C0760 code to appear on a Buick?
The most common causes are low tire pressure, a faulty tire pressure monitoring sensor (TPMS), sensor battery failure, or communication issues between the sensor and the TPMS module.
4. How do I fix the C0760 code on my Buick?
Start by checking and inflating the left rear tire to the recommended pressure. If the code persists, inspect or replace the left rear tire pressure sensor.
5. Can I still drive my Buick with the C0760 code?
Yes, but driving with incorrect tire pressure can lead to uneven tire wear, reduced fuel efficiency, and safety concerns. Address the issue promptly.
6. How can I reset the TPMS system after fixing the C0760 code?
After checking or replacing the sensor, use your vehicle’s TPMS reset procedure, often found in the owner’s manual, or use a TPMS reset tool.
7. How much does it cost to replace a faulty tire pressure sensor on a Buick?
Replacement costs typically range from $50 to $150 per sensor, including parts and labor, depending on the model and location.
8. Can bad weather or temperature changes trigger the C0760 code?
Yes, cold weather can cause tire pressure to drop, potentially triggering the code. Check and adjust tire pressure during temperature changes.
9. Do I need to replace all tire pressure sensors if one fails?
No, you only need to replace the faulty sensor, though replacing all sensors at once can be more cost-effective if they are nearing the end of their lifespan.
10. How long do tire pressure sensors typically last on a Buick?
Tire pressure sensors usually last 5 to 10 years, depending on usage and environmental factors.
Discuss the causes and fixes for C0760 Buick OBDII Code
Code C0760 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
