C0760 2018 Chevrolet Silverado Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 2018 Chevrolet Silverado indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0760 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0760 2018 Chevrolet Silverado?
- Perform the Tire Pressure Indicator Sensor Learn
- Faulty Left Rear Low Tire Pressure Sensor
- Left Rear Low Tire Pressure Sensor harness is open or shorted
- Left Rear Low Tire Pressure Sensor circuit poor electrical connection
How to Fix the DTC C0760 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0760 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0760 2018 Chevrolet Silverado code?
Need more information on how to fix the C0760 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 2018 Chevrolet Silverado Code
1. What does the OBDII code C0760 mean on a 2018 Chevrolet Silverado?
The code C0760 indicates an issue with the left rear tire pressure sensor, specifically low tire pressure or a sensor malfunction.
2. What are the common symptoms of code C0760?
Symptoms include a low tire pressure warning light on the dashboard, inaccurate tire pressure readings, or no reading for the left rear tire.
3. What causes the C0760 code to appear?
It can be caused by low tire pressure, a faulty tire pressure sensor, damaged wiring, or interference affecting the tire pressure monitoring system (TPMS).
4. How can I fix the C0760 code on my Silverado?
Start by checking and inflating the left rear tire to the recommended pressure. If the issue persists, inspect the sensor and wiring, or replace the faulty tire pressure sensor.
5. Can I drive my Silverado with the C0760 code active?
Yes, but it’s not recommended for long distances, as it may indicate a potentially hazardous low tire pressure situation.
6. How do I reset the TPMS after addressing the C0760 code?
Use the TPMS reset procedure in your owner’s manual, which typically involves cycling the ignition and using a TPMS relearn tool or the infotainment system.
7. How much does it cost to replace a faulty tire pressure sensor?
Replacing a TPMS sensor can cost between $50 and $150 per sensor, depending on labor and parts.
8. What tools are needed to diagnose the C0760 code?
A TPMS scan tool and an OBDII scanner are helpful for diagnosing the issue and verifying the fault code.
9. Can the C0760 code be triggered by temperature changes?
Yes, extreme cold or heat can temporarily lower tire pressure, triggering the code. Always check tire pressure before replacing any parts.
10. Is a sensor recalibration required after fixing the C0760 code?
Yes, after replacing or repairing the sensor, recalibration or a TPMS relearn process is typically required to sync the new sensor with the vehicle.
Discuss the causes and fixes for C0760 2018 Chevrolet Silverado OBDII Code
Code C0760 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
