AutoCodesGeneric – C0625

C0625 Code - Left Rear Position Sensor Circuit

Quick Answer

The Suspension Control Module supplies a 5 V reference signal to each Suspension Position Sensor. Common causes include Faulty Left Rear Position Sensor, Left Rear Position Sensor harness is open or shorted, Left Rear Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0625 indicates Left Rear Position Sensor Circuit.
Common causes
Common causes include Faulty Left Rear Position Sensor, Left Rear Position Sensor harness is open or shorted, Left Rear Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 11,701
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 16, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0625 Description

The Suspension Control Module supplies a 5 V reference signal to each Suspension Position Sensor. The Suspension Position Sensors supply a signal of 0.35–4.75 V to the Suspension Control Module which represents the position between the body and the wheel. The sensors are also grounded through the Suspension Control Module. The Diagnostic Trouble Code (DTC) will be set when the Suspension Control Module measures a Suspension Position Sensor signal less than 0.35 V or greater than 4.75 V for more than 5 s while the vehicle is operated under normal driving conditions.
OBDII Code C0625 - Left Rear Position Sensor Circuit - AutoCodes.com
C0625 Code - Left Rear Position Sensor Circuit

What are the Possible Causes of the DTC C0625?

  • Faulty Left Rear Position Sensor
  • Left Rear Position Sensor harness is open or shorted
  • Left Rear Position Sensor circuit poor electrical connection
  • Faulty Suspension Control Module

How to Fix the DTC C0625?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0625 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0625 code?

Need more information on how to fix the C0625 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0625 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0625 Code

1. What does OBDII code C0625 mean?

C0625 indicates a problem with the left rear position sensor circuit, which monitors the suspension height or position of the vehicle's left rear wheel.

2. What are the common symptoms of code C0625?

Symptoms may include uneven vehicle suspension, poor ride quality, an illuminated suspension warning light, or a noticeable lean to one side of the vehicle.

3. What causes code C0625 to appear?

Common causes include a faulty left rear position sensor, damaged or corroded wiring, loose connections, or an issue with the control module.

4. Can I drive with code C0625 active?

While the vehicle may still be drivable, ignoring the issue can lead to further suspension problems or uneven tire wear, so it’s best to address it promptly.

5. How do I diagnose code C0625?

Start by visually inspecting the left rear position sensor, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

6. How can I fix code C0625?

Repairs may involve replacing the left rear position sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming the control module if necessary.

7. How much does it cost to repair code C0625?

The cost varies depending on the root cause. Replacing the sensor typically costs $150-$300, while wiring repairs may cost less if minimal.

8. Can a faulty left rear position sensor cause suspension issues?

Yes, a faulty sensor can send incorrect data to the control module, leading to uneven suspension adjustments or poor ride quality.

9. Is code C0625 specific to a certain vehicle brand?

No, C0625 is a generic chassis code used by various manufacturers, but its exact diagnosis and repair may vary depending on the vehicle.

10. Can a software update fix code C0625?

In some cases, a software update for the suspension control module may resolve the issue if it’s related to a programming glitch.

Discuss the causes and fixes for C0625 OBDII Code

Code C0625 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play