C0558 Buick Code - Calibration Data Configuration Not Programmed
Quick Answer
The Electronic Brake Control Module (EBCM) receives serial data messages from other modules. Common causes include Faulty Electronic Brake Control Module (EBCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0558 Buick indicates Calibration Data Configuration Not Programmed.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0558 Buick Description
What are the Possible Causes of the DTC C0558 Buick?
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0558 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0558 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0558 Buick code?
Need more information on how to fix the C0558 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0558 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0558 Buick Code
1. What does the OBDII code C0558 mean on a Buick?
C0558 indicates that the vehicle's Electronic Brake Control Module (EBCM) has detected missing or incorrect calibration data.
2. What are the common symptoms of the C0558 code?
Symptoms may include the ABS or traction control warning light illuminating, reduced or disabled ABS functionality, and possible loss of traction control.
3. What causes the C0558 code to appear?
This code is typically caused by improper programming or missing calibration data in the EBCM, often due to a module replacement or software corruption.
4. Can I drive my Buick with the C0558 code?
While the vehicle may still be drivable, safety features like ABS and traction control may be compromised, so it’s best to address the issue promptly.
5. How is the C0558 code diagnosed?
A technician will use a scan tool to confirm the code, check the EBCM for proper calibration, and ensure there are no communication issues or related electrical faults.
6. Can the C0558 code be fixed without replacing the EBCM?
Yes, in many cases, reprogramming or reconfiguring the EBCM with the correct calibration data can resolve the issue without needing a replacement.
7. What tools are needed to fix the C0558 code?
A professional-grade scan tool or GM-specific programming equipment is required to reprogram or calibrate the EBCM.
8. Is the C0558 code specific to Buick vehicles?
No, this code can appear on other GM vehicles, but the repair steps and calibration data will vary depending on the make and model.
9. How much does it cost to fix the C0558 code?
The cost depends on whether reprogramming or replacing the EBCM is required, typically ranging from $150 to $600, including labor.
10. Can a C0558 code reappear after being fixed?
Yes, the code can return if the EBCM is not correctly programmed or if there is an underlying issue with the module or wiring.
Discuss the causes and fixes for C0558 Buick OBDII Code
Code C0558 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
