AutoCodes – Chevrolet – C0558 2014 Chevrolet Silverado

C0558 2014 Chevrolet Silverado Code - Calibration Data Configuration Not Programmed

Quick Answer

The Electronic Brake Control Module (EBCM) receives serial data messages from other modules. Common causes include Faulty Electronic Brake Control Module (EBCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0558 2014 Chevrolet Silverado indicates Calibration Data Configuration Not Programmed.
Common causes: Common causes include Faulty Electronic Brake Control Module (EBCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 347

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0558 2014 Chevrolet Silverado Description

The Electronic Brake Control Module (EBCM) receives serial data messages from other modules. The Electronic Brake Control Module must be configured with the Vehicle Identification Number (VIN), configuration data, and vehicle options. If not correctly configured after installation, the Electronic Brake Control Module may set this Diagnostic Trouble Code (DTC). The internal fault detection is handled inside the control module. No external circuits are involved. The DTC will be set when the Electronic Brake Control Module is not programmed.

OBDII Code C0558 2014 Chevrolet Silverado - Calibration Data Configuration Not Programmed - AutoCodes.com — C0558 2014 Chevrolet Silverado Code - Calibration Data Configuration Not Programmed

What does this mean?

What are the Possible Causes of the DTC C0558 2014 Chevrolet Silverado?

Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0558 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0558 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0558 2014 Chevrolet Silverado code?

Need more information on how to fix the C0558 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0558 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0558 2014 Chevrolet Silverado Code

1. What does the OBDII code C0558 mean on a 2014 Chevrolet Silverado?

C0558 indicates that the electronic control unit (ECU) has detected that the calibration data configuration is not programmed or is corrupted.

2. What are the common symptoms of code C0558 in a 2014 Chevrolet Silverado?

Symptoms may include warning lights on the dashboard, issues with stability control or traction control, and possible loss of certain electronic features.

3. What causes the C0558 code to appear on a 2014 Chevrolet Silverado?

The code is typically caused by incomplete programming, corrupted calibration data, or a failed control module.

4. Is it safe to drive with the C0558 code on my 2014 Chevrolet Silverado?

While the vehicle may still be drivable, the loss of stability or traction control features can impact safety, especially in poor driving conditions.

5. How can I diagnose the C0558 code on my 2014 Chevrolet Silverado?

Youâ€™ll need a compatible scan tool to check for the code, verify the module calibration status, and check for any additional codes that could indicate related issues.

6. Can a software update fix the C0558 code on a 2014 Chevrolet Silverado?

Yes, reprogramming or updating the affected module with the correct calibration data often resolves this issue.

7. Which module is typically affected by the C0558 code on a 2014 Chevrolet Silverado?

This code is often associated with the Electronic Brake Control Module (EBCM) or other related control modules.

8. Do I need to replace the control module to fix the C0558 code on my 2014 Chevrolet Silverado?

Not always. In many cases, reprogramming the existing module with the correct calibration data is sufficient. Replacement is only necessary if the module is damaged.

9. How much does it cost to fix the C0558 code on a 2014 Chevrolet Silverado?

The cost varies depending on whether reprogramming or module replacement is required. Reprogramming typically costs $100â€“$200, while module replacement can exceed $500.

10. Can a dead battery cause the C0558 code on a 2014 Chevrolet Silverado?

Yes, a dead or low battery can corrupt module data, potentially triggering this code. Always ensure the battery is in good condition before addressing the issue.