C0543 Code - Brake Pressure Sensor 2 Circuit High
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0543 indicates Brake Pressure Sensor 2 Circuit High.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0543 Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C0543?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C0543?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0543 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0543 code?
Need more information on how to fix the C0543 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0543 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C0543 Buick — Brake Pressure Sensor 2 Circuit High
- C0543 Cadillac — Brake Pressure Sensor 2 Circuit High
- C0543 Chevrolet — Brake Pressure Sensor 2 Circuit High
- C0543 GMC — Brake Pressure Sensor 2 Circuit High
Frequently Asked Questions about C0543 Code
1. What are common symptoms of OBDII code C0543 (Brake Pressure Sensor 2 Circuit High)?
- Common symptoms include the illumination of the "Brake Warning Light" on the dashboard, traction control issues, and potential decrease in brake performance.
2. What could cause OBDII code C0543 to trigger?
- The code C0543 may be triggered due to a faulty brake pressure sensor, damaged wiring or connectors related to the sensor, or issues with the brake control module.
3. How can I diagnose the cause of OBDII code C0543?
- Diagnosing the cause of code C0543 involves inspecting the brake pressure sensor wiring and connectors, testing the sensor for proper function, and checking the brake control module for any faults.
4. Can I continue driving with OBDII code C0543 present?
- It is not recommended to continue driving with code C0543 present, as it can affect the proper functioning of the braking system and compromise vehicle safety.
5. How do I repair OBDII code C0543 (Brake Pressure Sensor 2 Circuit High)?
- Repairing code C0543 may involve replacing the faulty brake pressure sensor, repairing or replacing damaged wiring or connectors, and clearing the trouble code using an OBDII scanner.
6. Is it safe to reset the OBDII code C0543 without repairing the issue?
- Resetting the code without addressing the underlying issue can temporarily clear the warning light, but the problem will likely resurface, potentially leading to safety risks.
7. Are there any DIY tips for fixing OBDII code C0543?
- DIY tips for fixing code C0543 include visually inspecting the sensor and its connections, checking for any obvious damage, and ensuring all electrical connections are secure.
8. How much does it cost to repair OBDII code C0543?
- The cost of repairing code C0543 can vary depending on the extent of the issue, the cost of parts needed for replacement, and labor charges from a mechanic.
9. Can a mechanic help me diagnose and repair OBDII code C0543?
- Yes, a qualified mechanic can diagnose the issue causing code C0543, perform necessary repairs or replacements, and ensure the problem is resolved correctly.
10. Will OBDII code C0543 cause my vehicle to fail an emissions test?
- Yes, OBDII code C0543 can cause a vehicle to fail an emissions test, as it indicates a malfunction in the brake pressure sensor system, which is important for vehicle safety and performance.
1. What are the common symptoms of OBDII code C0543 (Brake Pressure Sensor 2 Circuit High)?
- Common symptoms include the illumination of the "Brake Warning Light" on the dashboard, potential loss of brake performance, and possible ABS system malfunctions.
2. What are the possible causes of OBDII code C0543?
- The code C0543 can be triggered by issues like a faulty brake pressure sensor, damaged wiring or connectors in the brake pressure sensor circuit, or problems with the ABS control module.
4. Can I still drive my vehicle with OBDII code C0543 present?
- It is not recommended to drive your vehicle with OBDII code C0543 present, as it can lead to potential brake system issues and compromise your safety on the road.
5. How can I repair OBDII code C0543 (Brake Pressure Sensor 2 Circuit High)?
- Repairing code C0543 may involve replacing the faulty brake pressure sensor, repairing or replacing damaged wiring or connectors, or addressing any underlying issues with the ABS control module.
6. Is it safe to continue driving if the "Brake Pressure Sensor 2 Circuit High" code disappears on its own?
- It is not advisable to continue driving if the code disappears on its own, as there may still be underlying issues with the brake pressure sensor or ABS system that need to be addressed to ensure safe operation of the vehicle.
7. Can a DIY enthusiast fix OBDII code C0543 at home?
- While some basic troubleshooting steps can be done at home, diagnosing and repairing OBDII code C0543 may require specialized tools and expertise, so it is recommended to consult a professional mechanic for proper diagnosis and repair.
8. How much does it typically cost to repair OBDII code C0543?
- The cost of repairing OBDII code C0543 can vary depending on the underlying issue, but it may involve parts and labor costs ranging from $100 to $500 or more, depending on the extent of the repair needed.
9. Will OBDII code C0543 cause my vehicle to fail an emissions test?
- Yes, OBDII code C0543 can cause your vehicle to fail an emissions test, as it indicates a potential issue with the brake pressure sensor circuit, which is an essential component for proper brake system operation.
10. Can resetting the OBDII system clear code C0543 permanently?
- Resetting the OBDII system may temporarily clear the code C0543, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and repair the root cause of the problem to prevent the code from recurring.
Discuss the causes and fixes for C0543 OBDII Code
Code C0543 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
