C053F 2018 GMC Sierra Code - Brake Pressure Sensor 1 Circuit High
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C053F 2018 GMC Sierra indicates Brake Pressure Sensor 1 Circuit High.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C053F 2018 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C053F 2018 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C053F 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C053F 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C053F 2018 GMC Sierra code?
Need more information on how to fix the C053F 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C053F 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C053F 2018 GMC Sierra Code
1. What are the common symptoms associated with OBDII code C053F in a 2018 GMC Sierra?
- Common symptoms include the illumination of the check engine light, a decrease in brake performance, and potential issues with the vehicle's stability control system.
2. What does the OBDII code C053F "Brake Pressure Sensor 1 Circuit High" indicate in a 2018 GMC Sierra?
- This code indicates that there is a high voltage condition detected in the circuit of Brake Pressure Sensor 1 in the vehicle's braking system.
3. What are the possible causes of OBDII code C053F in a 2018 GMC Sierra?
- Possible causes include a faulty brake pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle's electronic brake control module.
4. How can I diagnose the root cause of OBDII code C053F in my 2018 GMC Sierra?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the brake pressure sensor and its wiring for damage, and testing the sensor's voltage output.
5. Can driving with OBDII code C053F present in a 2018 GMC Sierra be dangerous?
- Driving with this code present can potentially be dangerous due to compromised braking performance and stability control. It is advisable to address the issue promptly.
6. Is it safe to continue driving my 2018 GMC Sierra with OBDII code C053F without repairing it immediately?
- It is not recommended to continue driving the vehicle with this code present, as it can lead to unsafe driving conditions and potential brake system failures.
7. How can I repair OBDII code C053F in my 2018 GMC Sierra?
- Repairing this code may involve replacing the brake pressure sensor, repairing or replacing damaged wiring or connectors, and clearing the fault code with a diagnostic scanner.
8. Can I reset the OBDII code C053F in my 2018 GMC Sierra by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is not a permanent solution. It is recommended to diagnose and address the underlying issue to prevent the code from reoccurring.
9. Are there any DIY tips for resolving OBDII code C053F in a 2018 GMC Sierra?
- DIY tips may include checking and cleaning the sensor connectors, inspecting the wiring for visible damage, and ensuring proper installation of a new brake pressure sensor if needed.
10. Will OBDII code C053F in my 2018 GMC Sierra cause the vehicle to fail an emissions test?
- Yes, this code may cause the vehicle to fail an emissions test, as it indicates a malfunction in the braking system that can impact vehicle safety and emissions control.
Discuss the causes and fixes for C053F 2018 GMC Sierra OBDII Code
Code C053F 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
