C053F 2016 GMC Sierra Code - Brake Pressure Sensor 1 Circuit High
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C053F 2016 GMC Sierra indicates Brake Pressure Sensor 1 Circuit High.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C053F 2016 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C053F 2016 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C053F 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C053F 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C053F 2016 GMC Sierra code?
Need more information on how to fix the C053F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C053F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C053F 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code C053F on a 2016 GMC Sierra related to Brake Pressure Sensor 1 Circuit High?
- Common symptoms include the illumination of the ABS warning light on the dashboard, issues with the vehicle's traction control system, and potential braking performance issues.
2. What are the possible causes of OBDII code C053F indicating Brake Pressure Sensor 1 Circuit High on a 2016 GMC Sierra?
- The code may be triggered by a faulty brake pressure sensor, damaged wiring or connectors in the brake pressure sensor circuit, or issues with the ABS module.
3. How can I diagnose the cause of OBDII code C053F on my 2016 GMC Sierra related to Brake Pressure Sensor 1 Circuit High?
- Diagnosing the issue involves checking the brake pressure sensor for proper operation, inspecting the wiring and connectors for any damage, and using a scan tool to communicate with the ABS module for further diagnosis.
4. Is it safe to continue driving my 2016 GMC Sierra with OBDII code C053F indicating Brake Pressure Sensor 1 Circuit High?
- It is not recommended to drive the vehicle with this code present as it can compromise the performance of the ABS system and potentially affect the vehicle's braking ability.
5. Can I clear the OBDII code C053F on my 2016 GMC Sierra related to Brake Pressure Sensor 1 Circuit High by simply resetting the vehicle's computer?
- While clearing the code may temporarily turn off the warning light, it is essential to diagnose and repair the underlying issue causing the code to prevent further safety risks.
6. What are some repair tips for addressing OBDII code C053F on a 2016 GMC Sierra associated with Brake Pressure Sensor 1 Circuit High?
- Repair tips include checking and cleaning the connectors, testing the brake pressure sensor for proper function, and consulting a professional if necessary for a comprehensive diagnosis and repair.
7. How much does it typically cost to fix OBDII code C053F on a 2016 GMC Sierra related to Brake Pressure Sensor 1 Circuit High?
- The cost of fixing this issue can vary depending on the exact cause of the problem, but it may involve sensor replacement, wiring repairs, or ABS module diagnostics, potentially ranging from a few hundred to over a thousand dollars.
8. Can weather conditions or rough driving affect the likelihood of triggering OBDII code C053F on a 2016 GMC Sierra related to Brake Pressure Sensor 1 Circuit High?
- Extreme weather conditions or rough driving can potentially exacerbate existing issues with the brake pressure sensor or its circuit, leading to the triggering of this code.
9. Are there any recalls or technical service bulletins related to OBDII code C053F for a 2016 GMC Sierra regarding Brake Pressure Sensor 1 Circuit High?
- It is recommended to check with a GMC dealership or the manufacturer's website for any relevant recalls or technical service bulletins related to this specific OBDII code.
Discuss the causes and fixes for C053F 2016 GMC Sierra OBDII Code
Code C053F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
