C053F Code - Brake Pressure Sensor 1 Circuit High
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C053F indicates Brake Pressure Sensor 1 Circuit High.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C053F Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C053F?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C053F?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C053F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C053F code?
Need more information on how to fix the C053F code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C053F code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C053F Buick — Brake Pressure Sensor 1 Circuit High
- C053F Cadillac — Brake Pressure Sensor 1 Circuit High
- C053F Chevrolet — Brake Pressure Sensor 1 Circuit High
- C053F GMC — Brake Pressure Sensor 1 Circuit High
Frequently Asked Questions about C053F Code
1. What does OBDII code C053F mean?
Code C053F indicates that the Brake Pressure Sensor 1 Circuit has a high voltage reading, suggesting an issue with the sensor or its related wiring.
2. What are the common symptoms of code C053F?
Symptoms may include an illuminated ABS or traction control warning light, reduced braking performance, or the inability of the ABS system to function properly.
3. What causes the C053F code to appear?
Common causes include a faulty brake pressure sensor, damaged or corroded wiring, poor electrical connections, or a malfunctioning ABS control module.
4. Can I still drive with code C053F?
While the vehicle may still be drivable, the ABS and traction control systems could be compromised, reducing braking performance in emergency situations. Prompt diagnosis and repair are recommended.
5. How do I diagnose the C053F code?
Diagnosis involves checking the brake pressure sensor's voltage using a multimeter, inspecting the wiring and connections for damage, and scanning the ABS module for additional fault codes.
6. How can I fix the C053F code?
Repairs may include replacing the brake pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ABS control module if necessary.
7. What tools are needed to fix code C053F?
You may need an OBDII scanner, a multimeter for voltage testing, and basic tools to access and replace the brake pressure sensor or repair wiring.
8. How much does it cost to fix code C053F?
Repair costs can vary but typically range from $150 to $500, depending on whether the sensor, wiring, or ABS module needs replacement.
9. Can a software update fix the C053F code?
In some cases, a software update for the ABS control module may resolve the issue, but this depends on the specific vehicle and manufacturer.
10. Is code C053F related to other ABS system codes?
Yes, C053F can be accompanied by other ABS-related codes, which may indicate additional issues with the brake system or traction control components.
Discuss the causes and fixes for C053F OBDII Code
Code C053F comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
