C053E 2014 GMC Sierra Code - Brake Pressure Sensor 1 Circuit Low
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C053E 2014 GMC Sierra indicates Brake Pressure Sensor 1 Circuit Low.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C053E 2014 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C053E 2014 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C053E 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C053E 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C053E 2014 GMC Sierra code?
Need more information on how to fix the C053E 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C053E 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C053E 2014 GMC Sierra Code
1. What are the common symptoms associated with OBDII code C053E in a 2014 GMC Sierra?
The common symptoms include the illumination of the check engine light, issues with the brake system, such as reduced braking performance, or the activation of the vehicle's stability control system.
2. What does the OBDII code C053E Brake Pressure Sensor 1 Circuit Low indicate in a 2014 GMC Sierra?
This code indicates a problem with the brake pressure sensor 1 circuit, suggesting that the signal from the sensor is lower than expected.
3. What are the possible causes of OBDII code C053E in a 2014 GMC Sierra?
Possible causes include a faulty brake pressure sensor, damaged wiring or connectors in the sensor circuit, low brake fluid levels, or issues with the brake hydraulic system.
4. How can I diagnose the cause of OBDII code C053E in my 2014 GMC Sierra?
Diagnosis typically involves using a scan tool to read the code, checking the brake fluid level, inspecting the brake pressure sensor and its wiring, and performing a thorough visual inspection of the brake system components.
5. Can I continue driving my 2014 GMC Sierra with OBDII code C053E present?
It is not recommended to drive the vehicle with this code present, as it can affect the proper functioning of the brake system and compromise vehicle safety. It is advisable to address the issue promptly.
6. How can I repair OBDII code C053E in my 2014 GMC Sierra?
Repairing this code may involve replacing the brake pressure sensor, repairing or replacing damaged wiring or connectors, topping up brake fluid levels, or addressing any other underlying issues in the brake system.
7. Is it safe to reset the OBDII code C053E in a 2014 GMC Sierra without fixing the underlying issue?
Resetting the code without addressing the underlying problem may temporarily turn off the check engine light, but the issue will likely persist and could lead to further complications with the brake system.
8. Can a DIY enthusiast fix OBDII code C053E in a 2014 GMC Sierra?
Depending on the DIY enthusiast's skill level and access to tools, some may be able to address this code by replacing the brake pressure sensor, checking wiring connections, or topping up brake fluid levels. However, professional diagnosis and repair are recommended for complex issues.
9. How much does it cost to fix OBDII code C053E in a 2014 GMC Sierra at a repair shop?
The cost of fixing this code can vary based on the underlying issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from reputable repair shops for an accurate estimate.
10. Will OBDII code C053E in a 2014 GMC Sierra cause the vehicle to fail an emissions test?
This code may not directly cause the vehicle to fail an emissions test, but it can indicate a problem with the brake system that needs to be addressed for overall vehicle safety and performance.
Discuss the causes and fixes for C053E 2014 GMC Sierra OBDII Code
Code C053E 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
