C044B 2017 GMC Sierra Code - Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions
Quick Answer
The Power Steering Control Module has a software feature that monitors the front wheels for vibration while operating on smooth roads at speeds higher than 75 kph (46.6 mph.) The electronic power steering provides damping to minimize oscillations of the steering wheel from disturbances from the tire/wheel assemblies. Common causes include Reprogram Power Steering Control Module, Faulty Power Steering Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C044B 2017 GMC Sierra indicates Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions.
- Common causes
- Common causes include Reprogram Power Steering Control Module, Faulty Power Steering Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C044B 2017 GMC Sierra Description
What are the Possible Causes of the DTC C044B 2017 GMC Sierra?
- Reprogram Power Steering Control Module
- Faulty Power Steering Control Module
How to Fix the DTC C044B 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C044B 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C044B 2017 GMC Sierra code?
Need more information on how to fix the C044B 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C044B 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C044B 2017 GMC Sierra Code
1. What are the common symptoms of OBDII code C044B in a 2017 GMC Sierra?
The common symptoms include a noticeable shake or vibration in the steering wheel while driving on smooth roads, and a warning message indicating "Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions" on the dashboard.
2. What can cause the OBDII code C044B to trigger in a 2017 GMC Sierra?
This code is typically triggered when the vehicle's electronic control module detects that the steering assist smooth road shake compensation system has been disabled due to an excessive number of transitions, indicating a potential issue with the system.
3. How serious is the OBDII code C044B in a 2017 GMC Sierra?
While this code may not cause immediate danger or loss of control, it can affect the smoothness of the steering operation and comfort of the ride. It is recommended to address the issue promptly to ensure optimal steering performance.
4. How can I diagnose the OBDII code C044B in my 2017 GMC Sierra?
Diagnosing this code usually involves using a diagnostic scan tool to retrieve the specific fault codes stored in the vehicle's system. Additionally, a thorough inspection of the steering components and related sensors may be necessary to pinpoint the exact cause.
5. What are some possible repair tips for addressing OBDII code C044B in a 2017 GMC Sierra?
Repair options may include resetting the system by clearing the fault codes, checking and resetting the steering angle sensor, inspecting for any loose or damaged wiring connections, and, if needed, replacing faulty components within the steering assist system.
6. Can I continue driving my 2017 GMC Sierra with the OBDII code C044B?
While it may be possible to continue driving the vehicle with this code present, it is advisable to address the issue as soon as possible to prevent any potential steering-related problems and ensure a safe driving experience.
7. How much does it typically cost to repair OBDII code C044B in a 2017 GMC Sierra?
The cost of repairing this code can vary depending on the underlying cause of the issue and the specific components that need to be repaired or replaced. It is recommended to consult a professional mechanic for an accurate diagnosis and cost estimate.
8. Is the OBDII code C044B a common issue in 2017 GMC Sierra vehicles?
While this code may not be as common as some other OBDII codes, it has been reported by some GMC Sierra owners. Regular maintenance and timely addressing of any warning lights or messages can help prevent such issues from occurring.
9. Can weather conditions or road conditions affect the triggering of OBDII code C044B in a 2017 GMC Sierra?
While extreme weather conditions or rough road surfaces may not directly trigger this code, they can potentially exacerbate any existing issues within the steering system that may lead to the disabling of the smooth road shake compensation feature.
10. Are there any recalls or technical service bulletins related to OBDII code C044B in 2017 GMC Sierra vehicles?
It's recommended to check with the manufacturer or authorized GMC service center to inquire about any recalls or technical service bulletins related to this specific OBDII code in 2017 GMC Sierra models.
Discuss the causes and fixes for C044B 2017 GMC Sierra OBDII Code
Code C044B 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
