C044B 2014 GMC Sierra Code - Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions
Quick Answer
The Power Steering Control Module has a software feature that monitors the front wheels for vibration while operating on smooth roads at speeds higher than 75 kph (46.6 mph.) The electronic power steering provides damping to minimize oscillations of the steering wheel from disturbances from the tire/wheel assemblies. Common causes include Reprogram Power Steering Control Module, Faulty Power Steering Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C044B 2014 GMC Sierra indicates Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions.
- Common causes
- Common causes include Reprogram Power Steering Control Module, Faulty Power Steering Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C044B 2014 GMC Sierra Description
What are the Possible Causes of the DTC C044B 2014 GMC Sierra?
- Reprogram Power Steering Control Module
- Faulty Power Steering Control Module
How to Fix the DTC C044B 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C044B 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C044B 2014 GMC Sierra code?
Need more information on how to fix the C044B 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C044B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C044B 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code C044B in a 2014 GMC Sierra?
- Common symptoms include a noticeable shake or vibration in the steering wheel, particularly when driving on smooth roads.
2. What does the code "Steering Assist Smooth Road Shake Compensation Disabled Too Many Transitions" mean?
- This code indicates that the vehicle's steering assist system has detected excessive transitions in smooth road shake compensation, leading to its disablement.
3. What could cause the Steering Assist Smooth Road Shake Compensation to be disabled in a 2014 GMC Sierra?
- The disablement of smooth road shake compensation could be caused by issues such as faulty sensors, damaged wiring, or a malfunction in the steering assist module.
4. How can I diagnose the cause of OBDII code C044B in my 2014 GMC Sierra?
- Diagnosing this code may require a thorough inspection of the steering system, including checking sensor readings, inspecting wiring for damage, and performing a diagnostic scan using a compatible OBDII scanner.
5. Can driving with OBDII code C044B pose any safety risks?
- While the vehicle should still be drivable with this code, the disablement of smooth road shake compensation may affect the vehicle's handling and stability, potentially leading to safety risks.
6. Is it safe to continue driving my 2014 GMC Sierra with Steering Assist Smooth Road Shake Compensation disabled?
- It is recommended to address the underlying issue causing the disablement to ensure safe driving conditions, as the disabled compensation feature may impact the vehicle's steering performance.
7. How can I reset OBDII code C044B in my 2014 GMC Sierra?
- Resetting the code typically involves using an OBDII scanner to clear the code after addressing the root cause of the issue, such as fixing sensor issues or wiring problems.
8. Can a DIY enthusiast repair OBDII code C044B in a 2014 GMC Sierra?
- Depending on the underlying cause, some DIY repairs may be possible, such as checking and correcting wiring issues. However, complex issues may require professional diagnosis and repair.
9. What are the potential repair options for resolving OBDII code C044B in a 2014 GMC Sierra?
- Repair options may include replacing faulty sensors, repairing damaged wiring, recalibrating the steering assist system, or replacing the steering assist module if necessary.
10. How much does it cost to fix OBDII code C044B in a 2014 GMC Sierra?
- Repair costs can vary depending on the specific issue causing the code, the labor rates of the repair facility, and the cost of any parts that need replacement. It is recommended to obtain quotes from different repair shops for an accurate estimate.
Discuss the causes and fixes for C044B 2014 GMC Sierra OBDII Code
Code C044B 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
