AutoCodesChevrolet – C038D 2014 Chevrolet Silverado

C038D 2014 Chevrolet Silverado Code - Range Actuator Position Not Learned

Quick Answer

This is an internal programming fault detection of the transfer case control module. Common causes include Perform Range Actuator Learn Procedure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C038D 2014 Chevrolet Silverado indicates Range Actuator Position Not Learned.
Common causes
Common causes include Perform Range Actuator Learn Procedure.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 504
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 11, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C038D 2014 Chevrolet Silverado Description

This is an internal programming fault detection of the transfer case control module. No external circuits are involved.
This Diagnostic Trouble Code (DTC) is set anytime a transfer case control module is replaced or reprogrammed. The Range Actuator Learn procedure must be performed in order for the transfer case control module to learn current clutch tolerance based on clutch stack up and accumulated clutch wear.
OBDII Code C038D 2014 Chevrolet Silverado - Range Actuator Position Not Learned - AutoCodes.com
C038D 2014 Chevrolet Silverado Code - Range Actuator Position Not Learned

What are the Possible Causes of the DTC C038D 2014 Chevrolet Silverado?

  • Perform Range Actuator Learn Procedure

How to Fix the DTC C038D 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C038D 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C038D 2014 Chevrolet Silverado code?

Need more information on how to fix the C038D 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C038D 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C038D 2014 Chevrolet Silverado Code

1. What does the OBDII code C038D mean on a 2014 Chevrolet Silverado?

C038D indicates that the transfer case range actuator's position has not been learned by the vehicle's control module, which can affect the 4WD system's operation.

2. What are the common symptoms of the C038D code?

Common symptoms include the "Service 4WD" message on the dashboard, inability to switch between 2WD and 4WD modes, and unusual noises from the transfer case.

3. What causes the C038D code to appear?

The code is often caused by a faulty range actuator, wiring issues, a malfunctioning transfer case control module (TCCM), or a failure to complete the actuator position learning process.

4. Can a weak battery trigger the C038D code?

Yes, a weak or low-voltage battery can disrupt the learning process or cause communication issues, potentially triggering the code.

5. How do I fix the C038D code on my 2014 Silverado?

Fixing the code may involve recalibrating the range actuator, inspecting and repairing wiring or connectors, replacing a faulty actuator, or reprogramming the TCCM.

6. Do I need to replace the transfer case range actuator to resolve C038D?

Not always. First, attempt a relearn procedure or inspect the wiring and connections. Replace the actuator only if it's confirmed to be defective.

7. How do you perform the range actuator position relearn?

The relearn procedure usually requires a scan tool with GM-specific capabilities to reset and recalibrate the actuator’s position.

8. Can driving with the C038D code cause damage to my Silverado?

Prolonged driving with this code can lead to transfer case issues or limit your ability to use 4WD, so it’s best to address it promptly.

9. Is the C038D code related to the transfer case control module (TCCM)?

Yes, a malfunctioning TCCM can prevent the range actuator from learning its position, triggering the C038D code.

10. How much does it cost to fix the C038D code?

Repair costs vary depending on the issue but may range from $100 for a relearn procedure to $500 or more if the actuator or TCCM needs replacement.

Discuss the causes and fixes for C038D 2014 Chevrolet Silverado OBDII Code

Code C038D 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play