C0364 2016 GMC Sierra Code - Front Axle System
Quick Answer
The front axle control circuit consists of an electric motor actuator that engages and disengages the front axle. Common causes include Faulty Front Axle Engagement Actuator, Front Axle Engagement Actuator harness is open or shorted, Front Axle Engagement Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0364 2016 GMC Sierra indicates Front Axle System.
- Common causes
- Common causes include Faulty Front Axle Engagement Actuator, Front Axle Engagement Actuator harness is open or shorted, Front Axle Engagement Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0364 2016 GMC Sierra Description
The front axle engagement actuator contains the following circuits: A Run/Crank Ignition 1 Voltage circuit, a Four-Wheel Drive Wheel Lock Indicator circuit, a Front Axle Actuator Control circuit, and a ground circuit.
When a shift to 4WD Auto, 4WD High, or 4WD Low is requested, the Transfer Case Control Module engages the front axle by grounding the front axle actuator control circuit through a current limiting driver.
This Diagnostic Trouble Code (DTC) will be set when a short to ground, short to voltage, or open circuit is detected.
What are the Possible Causes of the DTC C0364 2016 GMC Sierra?
- Faulty Front Axle Engagement Actuator
- Front Axle Engagement Actuator harness is open or shorted
- Front Axle Engagement Actuator circuit poor electrical connection
- Faulty Transfer Case Control Module
How to Fix the DTC C0364 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0364 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0364 2016 GMC Sierra code?
Need more information on how to fix the C0364 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0364 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0364 2016 GMC Sierra Code
1. What does OBDII code C0364 on a 2016 GMC Sierra indicate?
- OBDII code C0364 for a 2016 GMC Sierra refers to a fault in the front axle system.
2. What are the common symptoms of OBDII code C0364 in a 2016 GMC Sierra?
- Common symptoms of OBDII code C0364 in a 2016 GMC Sierra may include issues with engaging or disengaging four-wheel drive, unusual noises from the front axle, or a warning light on the dashboard.
3. What are the possible causes of OBDII code C0364 on a 2016 GMC Sierra?
- Possible causes of OBDII code C0364 on a 2016 GMC Sierra include a malfunctioning front axle actuator, damaged wiring or connectors in the front axle system, or a faulty control module.
4. How can I diagnose OBDII code C0364 on my 2016 GMC Sierra?
- To diagnose OBDII code C0364 on a 2016 GMC Sierra, you can use an OBDII scanner to retrieve the code and then inspect the front axle components for any visible damage or wear. Checking the wiring and connectors for continuity is also recommended.
5. What are some repair tips for fixing OBDII code C0364 on a 2016 GMC Sierra?
- Repair tips for OBDII code C0364 on a 2016 GMC Sierra may include replacing the front axle actuator, repairing or replacing damaged wiring or connectors, or reprogramming the control module if necessary.
6. Can OBDII code C0364 on a 2016 GMC Sierra be safely ignored?
- Ignoring OBDII code C0364 on a 2016 GMC Sierra is not recommended, as it can lead to potential issues with the front axle system and affect the vehicle's four-wheel drive functionality.
7. How much does it typically cost to repair OBDII code C0364 on a 2016 GMC Sierra?
- The cost to repair OBDII code C0364 on a 2016 GMC Sierra can vary depending on the specific cause of the issue, but it may range from a few hundred dollars for parts and labor to over a thousand dollars if major components need to be replaced.
8. Is it safe to drive my 2016 GMC Sierra with OBDII code C0364?
- It is not advisable to drive a 2016 GMC Sierra with OBDII code C0364, as it can indicate a problem with the front axle system that may compromise the vehicle's performance and safety.
9. Can I reset OBDII code C0364 on my 2016 GMC Sierra without fixing the issue?
- While you can reset OBDII code C0364 on a 2016 GMC Sierra using an OBDII scanner, it is important to address the underlying problem causing the code to prevent potential future issues with the front axle system.
10. How often does OBDII code C0364 occur in a 2016 GMC Sierra?
- The occurrence of OBDII code C0364 in a 2016 GMC Sierra can vary depending on factors such as driving conditions, maintenance history, and the overall condition of the front axle system.
Discuss the causes and fixes for C0364 2016 GMC Sierra OBDII Code
Code C0364 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
