C0364:01 Code - Front Axle System Short to Battery
Quick Answer
The front axle control circuit consists of an electric motor actuator that engages and disengages the front axle. Common causes include Faulty Front Axle Engagement Actuator, Front Axle Engagement Actuator harness is open or shorted, Front Axle Engagement Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0364:01 indicates Front Axle System Short to Battery.
- Common causes
- Common causes include Faulty Front Axle Engagement Actuator, Front Axle Engagement Actuator harness is open or shorted, Front Axle Engagement Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0364:01 Description
The front axle engagement actuator contains the following circuits: A Run/Crank Ignition 1 Voltage circuit, a Four-Wheel Drive Wheel Lock Indicator circuit, a Front Axle Actuator Control circuit, and a ground circuit.
When a shift to 4WD Auto, 4WD High, or 4WD Low is requested, the Transfer Case Control Module engages the front axle by grounding the front axle actuator control circuit through a current limiting driver.
This Diagnostic Trouble Code (DTC) will be set when the voltage on the front axle actuator control circuit is greater than 8.5 V.
What are the Possible Causes of the DTC C0364:01?
- Faulty Front Axle Engagement Actuator
- Front Axle Engagement Actuator harness is open or shorted
- Front Axle Engagement Actuator circuit poor electrical connection
- Faulty Transfer Case Control Module
How to Fix the DTC C0364:01?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0364:01 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0364:01 code?
Need more information on how to fix the C0364:01 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0364:01 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0364:01 Code
What does the OBDII code C0364:01 mean?
Code C0364:01 indicates a "Front Axle System Short to Battery," meaning there is an electrical short in the front axle actuator system.
What are common symptoms associated with code C0364:01?
Symptoms may include an illuminated check engine light, AWD or traction system warnings, and reduced functionality of the front axle system.
What causes the code C0364:01 to appear?
The code is typically caused by a short circuit in the wiring, connectors, or components of the front axle actuator system.
Can driving with code C0364:01 damage my vehicle?
Driving with this code may affect the functionality of the front axle system, potentially compromising traction and handling, but it is unlikely to cause immediate damage.
How can I diagnose the C0364:01 code?
Inspect the wiring and connectors for damage or corrosion, and use a multimeter to check for electrical shorts in the front axle actuator circuit.
What tools are needed to repair the C0364:01 code?
You may need a multimeter, wiring diagrams, basic hand tools, and potentially an OBDII scanner to verify the repair.
Can this code be fixed without professional help?
If you're comfortable with electrical diagnostics and repairs, you might be able to fix it by addressing the wiring issue or replacing the faulty component.
What parts might need to be replaced to fix code C0364:01?
Potential replacements include the front axle actuator, wiring harness, or connectors involved in the system.
Does clearing the code solve the problem?
Clearing the code without fixing the underlying issue will cause the error to reappear and will not resolve the problem.
How much does it typically cost to repair code C0364:01?
Repair costs vary, but minor wiring fixes can cost under $100, while replacing components may range from $200 to $600 or more, depending on labor and parts.
Discuss the causes and fixes for C0364:01 OBDII Code
Code C0364:01 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
