AutoCodes
 
OBDII Code List
 
C0327 CADILLAC

C0327 CADILLAC - Transfer Case Encoder Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Transfer Case Encoder
  • Transfer Case Encoder harness is open or shorted
  • Transfer Case Encoder circuit poor electrical connection

Possible symptoms

  • Anti-Lock Brake System (ABS) Warning Light ON
  • Engine Light ON (or Service Engine Soon Warning Light)

C0327 Cadillac Description

The transfer case encoder is a switch that converts a shaft position, representing a mode or range position, into electrical signals for use by the transfer case shift control module. The encoder houses 4 Hall effect sensors that are used for channels P, A, B, and C. These sensors provide a path to ground when a magnet, which is part of the shift rail, passes over them.

The transfer case shift control module supplies an 8-volt reference and a ground circuit for the encoder Hall effect sensors to function.

The transfer case shift control module supplies 5 volts on all the channels. As these channels are pulled to ground, the module can interpret the location of the transfer case shift position.

This DTC detects an open, short to ground, or a short to voltage in the encoder feed circuit, an open in the signal ground circuit, an open, short to ground, or short to voltage in the Encoder channel circuits.

OBDII Code C0327 Cadillac - Transfer Case Encoder Circuit Malfunction - AutoCodes.com

Need more help?

Get the C0327 Cadillac code diagnosed by a professional: Find a repair shop in your area

Related Information

C0327 CADILLAC Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C0327 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧