C0297 2018 Chevrolet Silverado Code - Brake Applied Output Circuit
Quick Answer
The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Body Control Module (BCM), Body Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0297 2018 Chevrolet Silverado indicates Brake Applied Output Circuit.
- Common causes
- Common causes include Brake Pedal Position Sensor Calibration, Faulty Body Control Module (BCM), Body Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0297 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0297 2018 Chevrolet Silverado?
- Brake Pedal Position Sensor Calibration
- Faulty Body Control Module (BCM)
- Body Control Module harness is open or shorted
- Body Control Module circuit poor electrical connection
How to Fix the DTC C0297 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0297 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0297 2018 Chevrolet Silverado code?
Need more information on how to fix the C0297 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0297 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0297 2018 Chevrolet Silverado Code
1. What does the OBDII code C0297 mean on a 2018 Chevrolet Silverado?
C0297 indicates an issue in the Brake Applied Output Circuit, which monitors the signal related to brake application.
2. What are the common symptoms of code C0297 on a Chevy Silverado?
Symptoms may include erratic brake light operation, ABS or traction control warning lights, and reduced braking system performance.
3. What causes the C0297 code to appear on a 2018 Chevrolet Silverado?
Common causes include a faulty brake light switch, damaged wiring or connectors in the brake circuit, or issues with the vehicle's BCM (Body Control Module).
4. Can a faulty brake light switch trigger code C0297?
Yes, a malfunctioning brake light switch is a common cause of this code as it disrupts the Brake Applied Output Circuit.
5. How do I diagnose code C0297 on my Chevy Silverado?
Start by inspecting the brake light switch, wiring, and connectors for damage or corrosion. Use a scan tool to monitor the circuit’s functionality.
6. Can code C0297 affect ABS or traction control systems?
Yes, this code can impact these systems as they rely on accurate brake application signals for proper operation.
7. Is it safe to drive with code C0297 on a 2018 Chevy Silverado?
It’s not recommended to drive with this code active, as it may compromise braking system reliability and affect vehicle safety.
8. How do I fix code C0297 on my Chevy Silverado?
Repair steps may include replacing the brake light switch, repairing damaged wiring, or reprogramming the BCM if necessary.
9. Can a weak or dead battery cause code C0297?
While unlikely, electrical issues such as low voltage or power interruptions can sometimes contribute to circuit-related faults.
10. Does clearing code C0297 fix the problem permanently?
No, clearing the code without addressing the underlying issue will result in the code reappearing. Repairs are necessary to resolve the problem.
Discuss the causes and fixes for C0297 2018 Chevrolet Silverado OBDII Code
Code C0297 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
