C0292 GMC Code - EBCM Failed To Receive Serial Data From PCM
Quick Answer
The Powertrain Control Module (PCM) sends a state of health message to the Electronic Brake Control Module (EBCM) within 5.5 seconds after the modules are powered up. Common causes include Electronic Brake Control Module (EBCM) Calibration, Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0292 GMC indicates EBCM Failed To Receive Serial Data From PCM.
- Common causes
- Common causes include Electronic Brake Control Module (EBCM) Calibration, Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0292 GMC Description
What are the Possible Causes of the DTC C0292 GMC?
- Electronic Brake Control Module (EBCM) Calibration
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module (EBCM) harness is open or shorted
- Electronic Brake Control Module (EBCM) circuit poor electrical connection
How to Fix the DTC C0292 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0292 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0292 GMC code?
Need more information on how to fix the C0292 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0292 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0292 GMC Code
1. What does the OBDII code C0292 mean on a GMC vehicle?
C0292 indicates that the Electronic Brake Control Module (EBCM) failed to receive proper serial data communication from the Powertrain Control Module (PCM).
2. What are the common symptoms of code C0292 on a GMC vehicle?
Symptoms may include the ABS or traction control light illuminating, loss of traction or stability control functionality, and possible braking performance issues.
3. What causes the C0292 code to appear on a GMC vehicle?
Common causes include faulty wiring or connectors between the EBCM and PCM, a malfunctioning EBCM, a defective PCM, or software issues.
4. Can a bad ground connection cause the C0292 code?
Yes, a poor ground connection can disrupt communication between the EBCM and PCM, triggering the C0292 code.
5. How can I diagnose the C0292 code on my GMC?
Start by checking the wiring and connectors between the EBCM and PCM for damage or corrosion. Use a scan tool to verify communication between the modules and test the modules for proper functionality.
6. Is it safe to drive with the C0292 code active?
It may be unsafe, as the ABS and traction control systems could be compromised, potentially affecting braking and stability in certain driving conditions.
7. Can updating the PCM or EBCM software fix the C0292 code?
In some cases, a software update for the PCM or EBCM may resolve communication issues that cause the code.
8. How much does it cost to repair the C0292 code on a GMC vehicle?
Repair costs can vary depending on the issue. Minor fixes like wiring repairs might cost $100–$200, while replacing a module could cost $500–$1,500.
9. What tools are needed to troubleshoot the C0292 code?
You’ll need an OBDII scan tool with advanced diagnostic capabilities, a multimeter to test wiring, and access to the vehicle’s wiring diagrams.
10. Can a failing PCM trigger the C0292 code?
Yes, a failing PCM that cannot send proper serial data to the EBCM can cause the C0292 code to appear.
Discuss the causes and fixes for C0292 GMC OBDII Code
Code C0292 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
