C0288 Buick Code - EBCM Detects Sensor Supply Voltage Fluctuating
Quick Answer
The Electronic Brake Control Module (EBCM) supplies a reference voltage of 5 volts to the yaw rate sensor/lateral accelerometer and the master cylinder pressure sensor. Common causes include Faulty Master Cylinder Pressure Sensor, Faulty Yaw Rate Sensor/Lateral Accelerometer. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0288 Buick indicates EBCM Detects Sensor Supply Voltage Fluctuating.
- Common causes
- Common causes include Faulty Master Cylinder Pressure Sensor, Faulty Yaw Rate Sensor/Lateral Accelerometer.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0288 Buick Description
What are the Possible Causes of the DTC C0288 Buick?
- Faulty Master Cylinder Pressure Sensor
- Faulty Yaw Rate Sensor/Lateral Accelerometer
How to Fix the DTC C0288 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0288 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0288 Buick code?
Need more information on how to fix the C0288 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0288 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0288 Buick Code
What does the OBDII code C0288 mean on a Buick?
Code C0288 indicates that the Electronic Brake Control Module (EBCM) has detected fluctuating sensor supply voltage, which can affect the operation of the braking system.
What are the common symptoms of code C0288 on a Buick?
Common symptoms include an illuminated ABS warning light, reduced or no ABS functionality, and in some cases, a soft or spongy brake pedal feel.
What causes the C0288 code to appear?
The code is typically caused by wiring issues, such as damaged or corroded harnesses, a failing EBCM, a faulty wheel speed sensor, or issues with the vehicle's power or ground supply to the EBCM.
Can I safely drive with the C0288 code active?
While you can drive, the ABS system may not function properly, increasing the risk of wheel lockup during hard braking. It’s recommended to address the issue promptly.
How do I diagnose the C0288 code on my Buick?
Start by checking the wiring and connectors related to the EBCM and wheel speed sensors for damage or corrosion. Then, test the sensor supply voltage and inspect the EBCM for proper operation.
What tools are needed to troubleshoot the C0288 code?
You’ll need an OBDII scanner, a multimeter to test voltage, and possibly a wiring diagram for your specific Buick model to trace electrical connections.
How can I fix the C0288 code on a Buick?
Repairs may include fixing or replacing damaged wiring, cleaning corroded connectors, replacing a faulty wheel speed sensor, or replacing the EBCM if it’s determined to be defective.
How much does it cost to repair the C0288 code?
The cost varies depending on the root cause. Replacing a wheel speed sensor typically costs $100–$300, while an EBCM replacement can range from $500–$1,200, including labor.
Can a battery issue trigger the C0288 code?
Yes, a weak or failing battery or alternator can cause voltage fluctuations, which may trigger this code. Always check the battery and charging system when diagnosing.
Is the C0288 code specific to Buicks?
No, while it’s common in Buicks, the C0288 code can appear in other GM vehicles with similar EBCM systems, as it’s a manufacturer-specific code.
Discuss the causes and fixes for C0288 Buick OBDII Code
Code C0288 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
