AutoCodes – Generic – C0277:12

C0277:12 Code - Brake Pedal Position Sensor Circuit Below Minimum Threshold

Quick Answer

The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted, Brake Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0277:12 indicates Brake Pedal Position Sensor Circuit Below Minimum Threshold.
Common causes: Common causes include Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted, Brake Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 266

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 05, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0277:12 Description

The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. The brake pedal position sensor provides an analog voltage signal that will increase as the brake pedal is applied. The Body Control Module (BCM) provides a low reference signal and a 5 V reference voltage to the brake pedal position sensor. When the variable signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery voltage to the left and right stop lamp control circuits as well as the center high-mounted stop lamp relay control circuit illuminating the left and right stop lamps and the center high mounted stop lamp. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a short to ground or an open/high resistance in the brake pedal position sensor 5 V reference circuit.

OBDII Code C0277:12 - Brake Pedal Position Sensor Circuit Below Minimum Threshold - AutoCodes.com — C0277:12 Code - Brake Pedal Position Sensor Circuit Below Minimum Threshold

What does this mean?

What are the Possible Causes of the DTC C0277:12?

Faulty Brake Pedal Position Sensor
Brake Pedal Position Sensor harness is open or shorted
Brake Pedal Position Sensor circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC C0277:12?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

C0277:06 Brake Pedal Position Sensor Circuit Low Voltage/Open
C0277:07 Brake Pedal Position Sensor Circuit High Voltage
C0277:09 Brake Pedal Position Sensor Circuit Too Fast Transitions
C0277:12 Brake Pedal Position Sensor Circuit Below Minimum Threshold
C0277:4B Brake Pedal Position Sensor Circuit Calibration Not Learned

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0277:12 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0277:12 code?

Need more information on how to fix the C0277:12 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0277:12 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.