C0267 2017 GMC Sierra Code - Low Brake Fluid Indicated
Quick Answer
The brake fluid level switch monitors the level of the brake fluid in the brake fluid reservoir. Common causes include Faulty Brake Fluid Level Switch, Brake Fluid Level Switch harness is open or shorted, Brake Fluid Level Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0267 2017 GMC Sierra indicates Low Brake Fluid Indicated.
- Common causes
- Common causes include Faulty Brake Fluid Level Switch, Brake Fluid Level Switch harness is open or shorted, Brake Fluid Level Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0267 2017 GMC Sierra Description
What are the Possible Causes of the DTC C0267 2017 GMC Sierra?
- Faulty Brake Fluid Level Switch
- Brake Fluid Level Switch harness is open or shorted
- Brake Fluid Level Switch circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0267 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0267 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0267 2017 GMC Sierra code?
Need more information on how to fix the C0267 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0267 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0267 2017 GMC Sierra Code
1. What does OBDII code C0267 on a 2017 GMC Sierra indicate?
The code C0267 in a 2017 GMC Sierra indicates low brake fluid level.
2. What are the common symptoms of OBDII code C0267 in a 2017 GMC Sierra?
Common symptoms include the illumination of the brake warning light on the dashboard and a message indicating low brake fluid level.
3. What can cause OBDII code C0267 to trigger in a 2017 GMC Sierra?
The code C0267 is typically triggered by a low brake fluid level in the master cylinder reservoir.
4. How can I verify if the brake fluid level is low in my 2017 GMC Sierra when OBDII code C0267 is present?
You can visually inspect the brake fluid reservoir to check if the level is below the recommended level marked on the reservoir.
5. Can driving with low brake fluid, indicated by OBDII code C0267, be dangerous?
Yes, driving with low brake fluid can be dangerous as it can lead to reduced braking performance and potentially compromise your ability to stop the vehicle safely.
6. What should I do if OBDII code C0267 is triggered in my 2017 GMC Sierra?
If code C0267 is triggered, the first step is to check the brake fluid level and top it up if it is below the recommended level. If the problem persists, consult a mechanic for further diagnosis.
7. Are there any DIY tips for addressing OBDII code C0267 in a 2017 GMC Sierra?
DIY tips include visually checking the brake fluid level, topping it up if needed, and ensuring there are no leaks in the brake system that could be causing the low fluid level.
8. Can I reset the OBDII code C0267 in my 2017 GMC Sierra after addressing the low brake fluid issue?
Once you have addressed the low brake fluid issue, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
9. Is it necessary to visit a mechanic if OBDII code C0267 keeps reappearing in my 2017 GMC Sierra?
If the code keeps reappearing after addressing the low brake fluid issue, it is recommended to consult a mechanic to diagnose any underlying brake system problems that may be causing the repeated trigger of the code.
10. Can OBDII code C0267 in a 2017 GMC Sierra be a false alarm?
While rare, it is possible for OBDII code C0267 to be a false alarm due to a sensor malfunction. If you have verified that the brake fluid level is adequate, consider having the sensor checked for proper functionality.
Discuss the causes and fixes for C0267 2017 GMC Sierra OBDII Code
Code C0267 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
