C0267 2014 Chevrolet Silverado Code - Low Brake Fluid Indicated
Quick Answer
The brake fluid level switch monitors the level of the brake fluid in the brake fluid reservoir. Common causes include Faulty Brake Fluid Level Switch, Brake Fluid Level Switch harness is open or shorted, Brake Fluid Level Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0267 2014 Chevrolet Silverado indicates Low Brake Fluid Indicated.
- Common causes
- Common causes include Faulty Brake Fluid Level Switch, Brake Fluid Level Switch harness is open or shorted, Brake Fluid Level Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0267 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0267 2014 Chevrolet Silverado?
- Faulty Brake Fluid Level Switch
- Brake Fluid Level Switch harness is open or shorted
- Brake Fluid Level Switch circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0267 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0267 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0267 2014 Chevrolet Silverado code?
Need more information on how to fix the C0267 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0267 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0267 2014 Chevrolet Silverado Code
1. What does the OBDII code C0267 mean on a 2014 Chevrolet Silverado?
C0267 indicates "Low Brake Fluid Indicated," meaning the vehicle's electronic brake control module (EBCM) has detected low brake fluid in the master cylinder reservoir.
2. What are the common symptoms of code C0267 in a 2014 Silverado?
Symptoms include the brake warning light illuminating, reduced braking performance, a soft or spongy brake pedal, and potential ABS system deactivation.
3. What causes code C0267 to appear on a 2014 Chevrolet Silverado?
Common causes include low brake fluid levels, a faulty brake fluid level sensor, a leaking brake system, or air in the brake lines.
4. Can I drive my 2014 Silverado with the C0267 code?
It is not recommended to drive with this code as it indicates a potential brake fluid issue, which can compromise braking performance and safety.
5. How do I fix the C0267 code on a 2014 Chevrolet Silverado?
Check and refill the brake fluid to the proper level, inspect for leaks in the brake system, and replace the brake fluid level sensor if it’s faulty.
6. What should I do if the brake fluid level is normal but the C0267 code persists?
Inspect the wiring and connections to the brake fluid level sensor for damage or corrosion, and test the sensor for proper operation.
7. How do I check for brake fluid leaks when troubleshooting code C0267?
Inspect the brake lines, calipers, and master cylinder for wetness or visible fluid leaks, and check for any drop in the fluid reservoir level over time.
8. Can a faulty ABS module cause the C0267 code?
While rare, a malfunctioning ABS module or EBCM could misinterpret sensor data and trigger the C0267 code.
9. How much does it typically cost to fix code C0267 on a 2014 Chevrolet Silverado?
Repairs can range from $50 to $300, depending on whether you need to refill brake fluid, replace the sensor, or repair a brake system leak.
10. Can air in the brake lines trigger the C0267 code?
Yes, air in the brake lines can lower hydraulic pressure, potentially causing the system to detect low brake fluid and set the C0267 code.
Discuss the causes and fixes for C0267 2014 Chevrolet Silverado OBDII Code
Code C0267 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
