AutoCodes – Chevrolet – C0252 2018 Chevrolet Silverado

C0252 2018 Chevrolet Silverado Code - Vehicle Stability Control Module Sensors Correlation Malfunction

Quick Answer

The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-axis Acceleration Sensor. Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0252 2018 Chevrolet Silverado indicates Vehicle Stability Control Module Sensors Correlation Malfunction.
Common causes: Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 228

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 04, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0252 2018 Chevrolet Silverado Description

The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-axis Acceleration Sensor. The Multi-axis Acceleration Sensor is located internal to the Airbag Sensing and Diagnostic Module. The Electronic Brake Control Module (EBCM) controls the stability control by monitoring the inputs of the Multi-axis Acceleration Sensor and the Steering Wheel Angle Sensor. The readings are compared to an internal calibrated value, so it knows if the vehicle is having an instability condition to activate the stability control. The Diagnostic Trouble Code (DTC) will be set when the vehicle is driven in a straight line the Multi-axis Acceleration Sensor, the Steering Wheel Angle Sensor, and the vehicle speed correlation is not recognized after a distance of 2.5 km (1.5 mi).

OBDII Code C0252 2018 Chevrolet Silverado - Vehicle Stability Control Module Sensors Correlation Malfunction - AutoCodes.com — C0252 2018 Chevrolet Silverado Code - Vehicle Stability Control Module Sensors Correlation Malfunction

What does this mean?

What are the Possible Causes of the DTC C0252 2018 Chevrolet Silverado?

Yaw Sensor Learn and Steering Wheel Angle Sensor Centering
Faulty Steering Wheel Angle Sensor
Faulty Airbag Sensing and Diagnostic Module
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0252 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0252 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0252 2018 Chevrolet Silverado code?

Need more information on how to fix the C0252 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0252 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0252 2018 Chevrolet Silverado Code

1. What does the OBDII code C0252 mean on a 2018 Chevrolet Silverado?

The code C0252 indicates a Vehicle Stability Control Module Sensors Correlation Malfunction, meaning the stability control system is detecting a mismatch or inconsistency between sensor inputs.

2. What are the common symptoms of the C0252 code on a 2018 Chevrolet Silverado?

Common symptoms include the ABS or stability control warning light illuminating, reduced stability control or ABS functionality, and possible difficulty maintaining vehicle traction.

3. What causes the C0252 code on a 2018 Chevrolet Silverado?

Causes may include faulty wheel speed sensors, a malfunctioning stability control module, damaged wiring or connectors, or incorrect calibration of the sensors.

4. Is it safe to drive with the C0252 code on a 2018 Chevrolet Silverado?

While the vehicle may still be drivable, it is not recommended to drive for long periods, as the stability control and ABS systems may not function correctly, increasing the risk of losing control in slippery conditions.

5. How do I diagnose the C0252 code on my 2018 Chevrolet Silverado?

Diagnosis involves scanning for additional codes, inspecting the wheel speed sensors and wiring, checking the stability control module connections, and performing a sensor calibration check.

6. Can a failed wheel speed sensor cause the C0252 code?

Yes, a damaged or malfunctioning wheel speed sensor can cause the code by sending inconsistent data to the stability control module.

7. How can the C0252 code be fixed on a 2018 Chevrolet Silverado?

Fixes include replacing faulty wheel speed sensors, repairing damaged wiring, recalibrating the stability control sensors, or replacing the stability control module if necessary.

8. How much does it cost to fix the C0252 code on a 2018 Chevrolet Silverado?

Repair costs vary, ranging from $100-$300 for sensor or wiring repairs to $500 or more if the stability control module needs replacement.

9. Do I need to recalibrate sensors after fixing the C0252 code?

Yes, recalibration of the stability control system sensors may be required after repairs to ensure proper functionality and prevent the code from returning.

10. Can I clear the C0252 code without performing repairs?

Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to reappear once the issue is detected again.