AutoCodes
 
OBDII Code List
 
C0219 BUICK

C0219 BUICK - Longitudinal Accelerometer Signal Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Electronic Brake Control Module (EBCM)
  • Electronic Brake Control Module (EBCM) harness is open or shorted
  • Electronic Brake Control Module (EBCM) circuit poor electrical connection

Possible symptoms

  • Anti-Lock Brake System (ABS) Warning Light ON
  • Engine Light ON (or Service Engine Soon Warning Light)

C0219 Buick Description

The Vehicle Stability Enhancement System (VSES) is activated when the Electronic Brake Control Module (EBCM) determines that the desired yaw rate does not match the actual yaw rate. The desired yaw rate is calculated from the measured steering wheel position, vehicle speed, and lateral acceleration. With no sensor bias present, a volt signal from these sensors is interpreted by the EBCM respectively as follows:

- Zero yaw rate.

- Zero lateral acceleration.

- Zero longitudinal acceleration.

The sensor bias compensates, during VSES initialization, for sensor mounting alignment errors, electronic signal errors, temperature changes, and manufacturing differences.

OBDII Code C0219 Buick - Longitudinal Accelerometer Signal Voltage - AutoCodes.com

Need more help?

Get the C0219 Buick code diagnosed by a professional: Find a repair shop in your area

Related Information

C0219 BUICK Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C0219 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧