C0212 Code - Yaw Rate Sensor Signals Voltage
Quick Answer
The Vehicle Stability Enhancement System (VSES) is activated when the Electronic Brake Control Module (EBCM) determines that the desired yaw rate does not match the actual yaw rate. Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0212 indicates Yaw Rate Sensor Signals Voltage.
- Common causes
- Common causes include Faulty Yaw Rate Sensor, Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0212 Description
- Zero yaw rate.
- Zero lateral acceleration.
- Zero longitudinal acceleration.
The sensor bias compensates, during VSES initialization, for sensor mounting alignment errors, electronic signal errors, temperature changes, and manufacturing differences.
What are the Possible Causes of the DTC C0212?
- Faulty Yaw Rate Sensor
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
How to Fix the DTC C0212?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0212 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0212 code?
Need more information on how to fix the C0212 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0212 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C0212 Buick — Yaw Rate Sensor Signals Voltage
- C0212 Cadillac — Yaw Rate Sensor Signals Voltage
- C0212 Chevrolet — Yaw Rate Sensor Signals Voltage
- C0212 GMC — Yaw Rate Sensor Signals Voltage
- C0212 Pontiac — Yaw Rate Sensor Signals Voltage
- C0212 Saturn — Yaw Rate Sensor Signals Voltage
Frequently Asked Questions about C0212 Code
1. What are the common symptoms of OBDII code C0212 (Yaw Rate Sensor Signals Voltage)?
The common symptoms of code C0212 include the ABS warning light or traction control light illuminating on the dashboard, as well as potential issues with the vehicle's stability control system.
2. What typically causes OBDII code C0212 to trigger?
Code C0212 is usually triggered when there is a malfunction in the yaw rate sensor signals voltage. This can be caused by sensor failure, wiring issues, or problems with the sensor's connection to the vehicle's electronic control unit (ECU).
3. How can I diagnose the source of OBDII code C0212?
To diagnose code C0212, a professional diagnostic scan tool is typically required to read the fault codes and analyze the sensor's voltage signals. Additionally, a visual inspection of the sensor and its wiring can help identify any visible issues.
4. Can I drive my vehicle with OBDII code C0212 present?
It is not recommended to drive your vehicle with code C0212 present, as it can affect the functionality of the vehicle's stability control system. It is best to address the issue promptly to ensure safe driving conditions.
5. What are some repair tips for fixing OBDII code C0212?
Repairing code C0212 may involve replacing the yaw rate sensor, repairing any damaged wiring, or ensuring a secure connection between the sensor and the ECU. It is advisable to consult a professional mechanic for accurate diagnosis and repair.
6. Is it possible to reset OBDII code C0212 without repairs?
Resetting the code without addressing the underlying issue may temporarily turn off the warning lights, but the problem will likely reoccur. It is important to diagnose and repair the root cause of the code to prevent further issues.
7. How much does it typically cost to repair OBDII code C0212?
The cost of repairing code C0212 can vary depending on the extent of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed. It is recommended to obtain quotes from different shops for an accurate estimate.
8. Can extreme weather conditions trigger OBDII code C0212?
Extreme weather conditions can potentially impact the performance of the yaw rate sensor and trigger code C0212. Moisture, heat, or cold can affect the sensor's operation, leading to voltage signal issues.
9. Are there any preventive measures to avoid OBDII code C0212 from occurring?
Regular maintenance checks, including inspecting the sensor and its wiring for any signs of wear or damage, can help prevent code C0212 from occurring. Keeping the vehicle in good condition can also minimize the risk of sensor failures.
10. How long does it take to repair OBDII code C0212?
The repair time for code C0212 can vary depending on the extent of the issue and the availability of replacement parts. In some cases, it may require a few hours to a day for diagnosis and repair by a qualified technician.
Discuss the causes and fixes for C0212 OBDII Code
Code C0212 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
