C0211 PONTIAC - Yaw Rate Sensor Signals Voltage
C0211 PONTIAC Possible Causes
- Faulty Yaw Rate Sensor
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
How do I fix code C0211 PONTIAC?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the C0211 PONTIAC code
Labor: 1.0The cost of diagnosing the C0211 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0211 PONTIAC DescriptionThe Vehicle Stability Enhancement System (VSES) is activated when the Electronic Brake Control Module (EBCM) determines that the desired yaw rate does not match the actual yaw rate. The desired yaw rate is calculated from the measured steering wheel position, vehicle speed, and lateral acceleration. With no sensor bias present, a volt signal from these sensors is interpreted by the EBCM respectively as follows:
- Zero yaw rate.
- Zero lateral acceleration.
- Zero longitudinal acceleration.
The sensor bias compensates, during VSES initialization, for sensor mounting alignment errors, electronic signal errors, temperature changes, and manufacturing differences.
More InformationNeed more information on how to fix the C0211 PONTIAC code?
Get Access to Factory Service Manuals
Need more help?Get the C0211 Pontiac code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C0211 Pontiac code? Have you replaced any parts?
Any information is appreciated. Thanks