C0201 Cadillac Code - Anti-Lock Brake System Enable Relay Contact Circuit
Quick Answer
The system relay, located within the Electronic Brake Control Module (EBCM), supplies battery voltage to all of the valve solenoids and to the ABS pump motor. Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0201 Cadillac indicates Anti-Lock Brake System Enable Relay Contact Circuit.
- Common causes
- Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0201 Cadillac Description
What are the Possible Causes of the DTC C0201 Cadillac?
- Faulty Anti-Lock Brake System Enable Relay
- Anti-Lock Brake System Enable Relay harness is open or shorted
- Anti-Lock Brake System Enable Relay circuit poor electrical connection
How to Fix the DTC C0201 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0201 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0201 Cadillac code?
Need more information on how to fix the C0201 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0201 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0201 Cadillac Code
1. What does the OBDII code C0201 indicate on a Cadillac?
The code C0201 on a Cadillac indicates an issue with the Anti-Lock Brake System (ABS) Enable Relay Contact Circuit, suggesting a malfunction within the circuit controlling the ABS system's relay.
2. What are common symptoms of code C0201 in a Cadillac?
Common symptoms include the ABS warning light illuminating on the dashboard, possible loss of anti-lock brake functionality, and in some cases, changes in braking behavior that might feel uneven or unresponsive.
3. What can cause the C0201 code to appear on a Cadillac?
Potential causes include faulty ABS enable relay, damaged wiring or connectors in the ABS circuit, or problems within the ABS control module itself.
4. How can I fix the C0201 code on a Cadillac?
Repairing code C0201 typically involves inspecting and testing the ABS enable relay and its circuit for faults. Replace the relay if defective, repair any damaged wiring, and ensure all connections are secure. Resetting the code and performing a road test may also be necessary after repairs are made.
5. Is it safe to drive a Cadillac with the C0201 code?
While you might still be able to drive your vehicle, doing so with an active C0201 code can be risky as it involves the braking system. Without ABS, braking distances might increase or braking could become uneven, especially under harsh conditions like wet or icy roads.
6. Does the C0201 code affect the entire braking system?
The C0201 code specifically impacts the anti-lock braking system, not the entire braking system. However, the overall braking capability might be compromised, particularly in emergency braking scenarios or on slippery surfaces.
7. What tools are needed to diagnose the C0201 code on a Cadillac?
Diagnosing the C0201 code requires an OBDII scanner to read the code and a multimeter to check the relay and circuit integrity. Additionally, a wiring diagram for the ABS system might be necessary for tracing connections and pinpointing issues.
8. How long does it take to fix the C0201 code in a Cadillac?
The time required to fix the C0201 can vary based on the specific cause of the issue. Simple relay replacements might take a few minutes, while locating and repairing wiring issues or replacing the ABS control module could take several hours.
9. Could the C0201 code be due to a simple electrical issue?
Yes, sometimes the C0201 code can be triggered by a simple electrical fault like loose connections, corroded terminals, or damaged wires within the ABS relay circuit. Checking and securing all electrical connections is a good first step in troubleshooting this code.
Discuss the causes and fixes for C0201 Cadillac OBDII Code
Code C0201 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
