AutoCodesBuick – C0201 Buick

C0201 Buick Code - Anti-Lock Brake System Enable Relay Contact Circuit

Quick Answer

The system relay, located within the Electronic Brake Control Module (EBCM), supplies battery voltage to all of the valve solenoids and to the ABS pump motor. Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0201 Buick indicates Anti-Lock Brake System Enable Relay Contact Circuit.
Common causes
Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,690
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0201 Buick Description

The system relay, located within the Electronic Brake Control Module (EBCM), supplies battery voltage to all of the valve solenoids and to the ABS pump motor. When the relay contacts close, the EBCM monitors the voltage supplied to the valve solenoids and compares this voltage to monitored ignition voltage.
OBDII Code C0201 Buick - Anti-Lock Brake System Enable Relay Contact Circuit - AutoCodes.com
C0201 Buick Code - Anti-Lock Brake System Enable Relay Contact Circuit

What are the Possible Causes of the DTC C0201 Buick?

  • Faulty Anti-Lock Brake System Enable Relay
  • Anti-Lock Brake System Enable Relay harness is open or shorted
  • Anti-Lock Brake System Enable Relay circuit poor electrical connection

How to Fix the DTC C0201 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0201 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0201 Buick code?

Need more information on how to fix the C0201 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0201 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0201 Buick Code

What does the OBDII code C0201 mean for a Buick?

C0201 indicates a problem with the Anti-Lock Brake System (ABS) enable relay contact circuit, which can affect the operation of the ABS.

What are some common symptoms of the C0201 code?

Common symptoms include the ABS warning light on the dashboard, reduced braking performance, and the inability of the ABS system to engage during hard braking.

What could cause the C0201 code to trigger?

Causes may include a faulty ABS enable relay, damaged wiring or connectors in the relay circuit, or a malfunctioning ABS control module.

How can I diagnose the C0201 code?

Begin by using an OBDII scanner to confirm the code, then inspect the ABS relay, wiring, and connectors for any signs of damage or corrosion. Testing the relay with a multimeter may also be necessary.

What repairs are commonly needed for the C0201 code?

Repairs may involve replacing the ABS enable relay, repairing or replacing damaged wiring, or addressing issues with the ABS control module.

Can I drive my vehicle with the C0201 code?

It is not advisable to drive your vehicle with this code, as it can affect braking performance and safety. It’s best to address the issue promptly.

How do I reset the C0201 code after repairs?

After making the necessary repairs, you can clear the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.

Are there any preventative measures to avoid the C0201 code?

Regular maintenance of the braking system, including checking wiring and connections, can help prevent issues related to the ABS system.

What is the cost of repairing the C0201 code?

Repair costs can vary widely depending on the specific issue, but replacing an ABS relay typically ranges from $50 to $150, while more extensive repairs could cost more.

Discuss the causes and fixes for C0201 Buick OBDII Code

Code C0201 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play