C0196 2016 GMC Sierra Code - Yaw Rate Signal
Quick Answer
The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-Axis Acceleration Sensor, internal to the Inflatable Restraint Sensing and Diagnostic Module. Common causes include Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module), Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0196 2016 GMC Sierra indicates Yaw Rate Signal.
- Common causes
- Common causes include Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module), Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0196 2016 GMC Sierra Description
What are the Possible Causes of the DTC C0196 2016 GMC Sierra?
- Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module)
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0196 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0196 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0196 2016 GMC Sierra code?
Need more information on how to fix the C0196 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0196 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0196 2016 GMC Sierra Code
1. What does the OBDII code C0196 indicate on a 2016 GMC Sierra?
The C0196 code on a 2016 GMC Sierra indicates a problem with the yaw rate sensor signal, which is part of the vehicle’s stability control system.
2. What symptoms might I notice if my 2016 GMC Sierra has the C0196 code?
Symptoms can include the traction or stability control warning light illuminating on the dashboard, reduced stability or traction control effectiveness, and in some cases, unusual handling characteristics or a feeling that the vehicle is 'drifting' during turns.
3. What are common causes of the C0196 code in a 2016 GMC Sierra?
Common causes include a faulty yaw rate sensor, damaged or corroded wiring and connectors related to the yaw rate sensor, or issues with the stability control module itself.
4. How can I troubleshoot the C0196 code in my 2016 GMC Sierra?
Troubleshooting should start with checking the condition and connections of the yaw rate sensor, including inspecting for any obvious damage to the sensor, connectors, and associated wiring. Scanning the vehicle with an OBDII reader can help determine if there are any additional codes that might be related to the issue.
5. What steps are involved in repairing a C0196 code on a 2016 GMC Sierra?
Repairing this code generally involves diagnosing the sensor and wiring condition, replacing the yaw rate sensor if it is defective, repairing any damaged wiring, and clearing the code from the vehicle’s computer system to verify the repair.
6. Is it safe to drive my 2016 GMC Sierra with the C0196 code?
While the vehicle may still be drivable, driving with the C0196 code can affect the vehicle's stability and traction control systems, potentially making it less safe, especially in poor driving conditions. It is advisable to address the issue as soon as possible.
7. Can a C0196 code clear itself on a 2016 GMC Sierra if the issue resolves on its own?
It is unlikely for the C0196 code to clear itself without intervention. Even if the underlying issue temporarily resolves, the code and the warning light will typically remain until they are manually cleared and the system is retested.
8. What tools are needed to diagnose the C0196 code on a 2016 GMC Sierra?
Diagnosing the C0196 code typically requires an OBDII scan tool capable of reading chassis codes, a multimeter for testing wiring continuity and sensor function, and possibly an oscilloscope to check the sensor’s signal more thoroughly.
9. How much does it typically cost to fix a C0196 code in a 2016 GMC Sierra?
The cost can vary depending on the specific cause. If it’s just a sensor replacement, it might cost anywhere from $150 to $300 including parts and labor. If wiring repairs or module replacement are needed, the cost could increase significantly.
Discuss the causes and fixes for C0196 2016 GMC Sierra OBDII Code
Code C0196 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
