C0196 2014 Chevrolet Silverado Code - Yaw Rate Signal
Quick Answer
The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-Axis Acceleration Sensor, internal to the Inflatable Restraint Sensing and Diagnostic Module. Common causes include Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module), Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0196 2014 Chevrolet Silverado indicates Yaw Rate Signal.
- Common causes
- Common causes include Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module), Yaw Rate Sensor harness is open or shorted, Yaw Rate Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0196 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0196 2014 Chevrolet Silverado?
- Faulty Yaw Rate Sensor (Internal to the Inflatable Restraint Sensing and Diagnostic Module)
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0196 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0196 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0196 2014 Chevrolet Silverado code?
Need more information on how to fix the C0196 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0196 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0196 2014 Chevrolet Silverado Code
1. What does OBDII code C0196 mean on a 2014 Chevrolet Silverado?
Code C0196 indicates an issue with the Yaw Rate Signal, which is part of the vehicle's stability control system. It suggests the sensor is malfunctioning or the signal is out of range.
2. What are the symptoms of code C0196 in a 2014 Chevrolet Silverado?
Common symptoms include the ABS or traction control light illuminating, reduced stability control functionality, and potential difficulty maintaining vehicle stability during sharp turns.
3. What causes code C0196 to appear?
This code can be caused by a faulty yaw rate sensor, damaged wiring or connectors, calibration issues, or a problem with the vehicle's electronic control module (ECM).
4. Can I still drive my 2014 Chevrolet Silverado with code C0196?
You can drive the vehicle, but it is not recommended, as the stability control system may not function properly, increasing the risk of losing control in certain driving situations.
5. How do I fix code C0196 on my 2014 Chevrolet Silverado?
Repairs may include replacing the yaw rate sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or recalibrating the stability control system.
6. Where is the yaw rate sensor located on a 2014 Chevrolet Silverado?
The yaw rate sensor is typically located under the center console or beneath the driver's seat, depending on the vehicle configuration.
7. Do I need to recalibrate the stability control system after fixing code C0196?
Yes, recalibration of the stability control system may be required after repairing or replacing the yaw rate sensor to ensure proper functionality.
8. How much does it cost to fix code C0196 in a 2014 Chevrolet Silverado?
The repair cost can vary, but replacing a yaw rate sensor typically costs between $200 and $500, including parts and labor. Additional costs may apply for diagnostics or wiring repairs.
9. Can a weak battery cause the C0196 code to appear?
Yes, a weak or failing battery can sometimes cause electrical issues, including triggering the C0196 code, as insufficient power can disrupt the stability control system.
10. How can I prevent code C0196 from recurring?
Regularly inspect and maintain the stability control system components, ensure proper calibration after repairs, and address wiring or connector issues promptly to prevent the code from reappearing.
Discuss the causes and fixes for C0196 2014 Chevrolet Silverado OBDII Code
Code C0196 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
