C012A Buick Code - Brake Master Cylinder Pressure Sensor
Quick Answer
The Electronic Brake Control Module (EBCM) uses input from the master cylinder pressure sensor for more accurate control during a vehicle stability enhancement system event. Common causes include Faulty Brake Pressure Modulator, Brake Pressure Modulator harness is open or shorted, Brake Pressure Modulator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C012A Buick indicates Brake Master Cylinder Pressure Sensor.
- Common causes
- Common causes include Faulty Brake Pressure Modulator, Brake Pressure Modulator harness is open or shorted, Brake Pressure Modulator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C012A Buick Description
What are the Possible Causes of the DTC C012A Buick?
- Faulty Brake Pressure Modulator
- Brake Pressure Modulator harness is open or shorted
- Brake Pressure Modulator circuit poor electrical connection
How to Fix the DTC C012A Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
- DTC C012A 01 Brake Master Cylinder Pressure Sensor Low Voltage/Open
- DTC C012A 06 Brake Master Cylinder Pressure Sensor Short to Ground or Open
- DTC C012A 11 Brake Master Cylinder Pressure Sensor High Input
- DTC C012A 0F Brake Master Cylinder Pressure Sensor Signal Erratic
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C012A Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C012A Buick code?
Need more information on how to fix the C012A Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C012A Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C012A Buick Code
1. What does the OBDII code C012A mean on a Buick?
C012A indicates an issue with the Brake Master Cylinder Pressure Sensor, which monitors the pressure applied to the braking system.
2. What are the symptoms of code C012A in a Buick?
Common symptoms include a lit ABS or brake warning light, reduced braking performance, or inconsistent brake pedal feel.
3. What causes the C012A code to appear on a Buick?
The code can be triggered by a faulty pressure sensor, damaged wiring or connectors, low brake fluid, or an issue with the ABS module.
4. Can I drive my Buick with a C012A code?
While the vehicle may still be drivable, it’s unsafe as braking performance could be compromised. Address the issue promptly.
5. How do I fix the C012A code on my Buick?
Inspect the brake pressure sensor, check the wiring and connectors for damage, and verify the brake fluid level. Replace faulty components as needed.
6. How much does it cost to repair a C012A code on a Buick?
Repairs can range from $100 to $300 or more, depending on whether the issue is a sensor replacement or more extensive ABS system repairs.
7. Can low brake fluid cause the C012A code on a Buick?
Yes, low brake fluid can lead to pressure sensor issues and trigger the C012A code.
8. Is it necessary to recalibrate the ABS system after fixing the C012A code?
In some cases, recalibration or clearing the code with a scan tool may be needed after repairs.
9. How can I prevent the C012A code from occurring on my Buick?
Regularly check brake fluid levels, inspect the braking system for wear, and address ABS issues promptly to avoid sensor failure.
10. Does a C012A code always mean the pressure sensor is bad?
No, the code could also result from wiring problems, connector corrosion, or a fault in the ABS module. Proper diagnosis is essential.
Discuss the causes and fixes for C012A Buick OBDII Code
Code C012A Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
