C0072 Ford Code - Brake Temperature Too High
Quick Answer
This Diagnostic Trouble Code (DTC) sets when the temperature of the brake discs/drums, as calculated by the ABS module, exceeds a predetermined threshold, 450°C (841.4°F). Common causes include Retrieve and Diagnose all other Anti-Lock Brake System (ABS) module codes. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0072 Ford indicates Brake Temperature Too High.
- Common causes
- Common causes include Retrieve and Diagnose all other Anti-Lock Brake System (ABS) module codes.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0072 Ford Description
What are the Possible Causes of the DTC C0072 Ford?
- Retrieve and Diagnose all other Anti-Lock Brake System (ABS) module codes
How to Fix the DTC C0072 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0072 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0072 Ford code?
Need more information on how to fix the C0072 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0072 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0072 Ford Code
1. What are the common symptoms of OBDII code C0072 Ford (Brake Temperature Too High)?
When this code is triggered, you may experience issues such as the brake warning light illuminating on the dashboard, reduced braking performance, and an increase in brake temperatures.
2. What are some possible causes of OBDII code C0072 Ford (Brake Temperature Too High)?
Potential causes of this code include a malfunctioning brake system component, such as a faulty brake caliper, damaged brake rotor, or issues with the brake fluid.
3. How serious is OBDII code C0072 Ford (Brake Temperature Too High)?
This code indicates a critical issue with the brake system that can compromise your vehicle's ability to brake effectively and safely. It is essential to address this problem promptly to avoid potential accidents.
4. Can driving with OBDII code C0072 Ford (Brake Temperature Too High) cause further damage?
Continuing to drive with this code activated can lead to overheating of the brakes, which can cause damage to other brake components and result in a complete brake failure. It is recommended to avoid driving until the issue is resolved.
5. What are some DIY repair tips for OBDII code C0072 Ford (Brake Temperature Too High)?
You can start by checking the brake system for any visible signs of damage, such as leaks, worn brake pads, or sticking calipers. Ensure the brake fluid level is adequate and have the system inspected by a professional if necessary.
6. How can a mechanic diagnose OBDII code C0072 Ford (Brake Temperature Too High)?
A mechanic will use a diagnostic scanner to retrieve the specific fault codes, inspect the brake system components for any signs of damage or wear, and perform tests to determine the exact cause of the high brake temperature issue.
7. Is it safe to reset OBDII code C0072 Ford (Brake Temperature Too High) and continue driving?
Resetting the code without addressing the underlying issue is not recommended, as it may lead to recurring problems with the brake system. It is crucial to diagnose and repair the cause of the high brake temperature to ensure safe driving.
8. How much does it typically cost to repair OBDII code C0072 Ford (Brake Temperature Too High)?
The cost of repairing this code can vary depending on the specific cause of the issue and the extent of the damage. Repair costs may include parts replacement, brake system servicing, and labor fees.
9. Can extreme weather conditions trigger OBDII code C0072 Ford (Brake Temperature Too High)?
Extreme heat or driving in mountainous terrain can potentially increase brake temperatures and contribute to triggering this code. It is essential to monitor your vehicle's brake system performance in such conditions.
10. How often should I inspect my vehicle's brake system to prevent OBDII code C0072 Ford (Brake Temperature Too High)?
Regular brake system inspections, typically during routine maintenance intervals or whenever you notice any unusual brake behavior, can help prevent issues like high brake temperatures and ensure your safety on the road.
Discuss the causes and fixes for C0072 Ford OBDII Code
Code C0072 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
