AutoCodes – Mercury – C006B Mercury

C006B Mercury Code - Stability System Active Too Long

Quick Answer

This Diagnostic Trouble Code (DTC) is for informational purposes only and sets along with one or more stability sensor DTC. Common causes include Faulty Stability System, Stability System harness is open or shorted, Stability System circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C006B Mercury indicates Stability System Active Too Long.
Common causes: Common causes include Faulty Stability System, Stability System harness is open or shorted, Stability System circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 972

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C006B Mercury Description

This Diagnostic Trouble Code (DTC) is for informational purposes only and sets along with one or more stability sensor DTC. Retrieve and diagnose all other Anti-Lock Brake System (ABS) module codes.

OBDII Code C006B Mercury - Stability System Active Too Long - AutoCodes.com — C006B Mercury Code - Stability System Active Too Long

What does this mean?

What are the Possible Causes of the DTC C006B Mercury?

Faulty Stability System
Stability System harness is open or shorted
Stability System circuit poor electrical connection

How to Fix the DTC C006B Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C006B Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C006B Mercury code?

Need more information on how to fix the C006B Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C006B Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C006B Mercury Code

1. What are common symptoms of OBDII code C006B Mercury "Stability System Active Too Long"?

- Common symptoms include the traction control or stability control warning light illuminating on the dashboard, reduced traction control effectiveness, and potential issues with vehicle stability during driving.

2. What can cause the OBDII code C006B Mercury to trigger?

- The code C006B typically triggers when the stability control system in the vehicle is engaged for an extended period, indicating a potential issue with the system's operation or a fault in one of its components.

3. How serious is the OBDII code C006B Mercury "Stability System Active Too Long"?

- While the code itself may not directly affect the drivability of the vehicle, it signifies a problem with the stability control system, which could compromise the vehicle's handling and safety features.

4. How can I diagnose the cause of OBDII code C006B Mercury?

- Diagnosis typically involves using a professional OBDII scanner to retrieve the specific error codes, checking the vehicle's stability control components for any visible damage or issues, and conducting a thorough inspection of the system.

5. What are some possible repair tips for OBDII code C006B Mercury?

- Repair tips may include inspecting and replacing damaged stability control sensors, checking and recalibrating the system, ensuring proper tire pressure and alignment, and clearing the error codes with an OBDII scanner.

6. Can I continue driving with the OBDII code C006B Mercury present?

- It is not recommended to ignore the code, as it indicates a potential issue with the stability control system that could affect the vehicle's handling and safety. It is advisable to have the system inspected and repaired as soon as possible.

7. How much does it cost to repair OBDII code C006B Mercury?

- The cost of repair can vary depending on the underlying cause of the code, the extent of the damage or malfunction, and the labor rates at the repair facility. It is best to consult a professional mechanic for a more accurate estimate.

8. Can I reset the OBDII code C006B Mercury on my own?

- While you can attempt to clear the error code using an OBDII scanner, it is crucial to address the root cause of the issue to prevent the code from reoccurring. If the problem persists, it is recommended to seek professional help.

9. Will OBDII code C006B Mercury cause my vehicle to fail an emissions test?

- The code C006B is related to the stability control system and is unlikely to cause your vehicle to fail an emissions test. However, it is still important to address the issue to ensure the overall safety and performance of your vehicle.

10. How can I prevent OBDII code C006B Mercury from appearing in the future?

- To prevent the code from reoccurring, it is essential to regularly maintain and inspect your vehicle's stability control system, ensure proper tire pressure and alignment, drive safely to avoid sudden maneuvers, and address any warning lights promptly.