C0050:18 Code - Right Rear Wheel Speed Sensor Circuit Low Signal Amplitude
Quick Answer
The wheel speeds are detected by active Wheel Speed Sensors (WSS) and encoder rings. Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0050:18 indicates Right Rear Wheel Speed Sensor Circuit Low Signal Amplitude.
- Common causes
- Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0050:18 Description
What are the Possible Causes of the DTC C0050:18?
- Faulty Right Rear Wheel Speed Sensor
- Right Rear Wheel Speed Sensor harness is open or shorted
- Right Rear Wheel Speed Sensor circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0050:18?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0050:18 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0050:18 code?
Need more information on how to fix the C0050:18 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0050:18 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0050:18 Code
1. What are the common symptoms of OBDII code C0050:18, Right Rear Wheel Speed Sensor Circuit Low Signal Amplitude?
The common symptoms include ABS warning light illuminated on the dashboard, traction control system malfunctions, and potential loss of stability control.
2. What could be the possible causes of OBDII code C0050:18?
Possible causes include a faulty right rear wheel speed sensor, damaged sensor wiring harness, poor electrical connections, or a malfunctioning ABS module.
3. How can I diagnose the issue related to the Right Rear Wheel Speed Sensor Circuit Low Signal Amplitude?
You can diagnose the issue by using a professional OBDII scanner to read the fault codes, visually inspecting the sensor and wiring for any visible damage, and conducting a continuity test on the sensor circuit.
4. What are the repair options for fixing OBDII code C0050:18?
Repair options may include replacing the right rear wheel speed sensor, repairing or replacing damaged wiring harness, ensuring proper electrical connections, or reprogramming the ABS module if necessary.
5. Can I drive my vehicle with OBDII code C0050:18 present?
It is not recommended to drive the vehicle with this code present as it can affect the proper functioning of the ABS and stability control systems, potentially compromising vehicle safety.
6. How much does it typically cost to repair OBDII code C0050:18?
The cost of repair can vary depending on the specific cause of the issue, but generally, replacing a wheel speed sensor or repairing wiring can range from $100 to $300 at a repair shop.
7. Is it possible to reset the OBDII code C0050:18 without fixing the underlying issue?
While you can clear the code temporarily with an OBDII scanner, the issue will likely reoccur until the root cause is properly diagnosed and repaired.
8. Can a DIY enthusiast fix OBDII code C0050:18 at home?
If you have experience with automotive repairs and the necessary tools, you may be able to replace a wheel speed sensor or repair wiring at home. However, if you're unsure, it's best to seek professional help.
9. How long does it take to repair OBDII code C0050:18?
The repair time can vary depending on the complexity of the issue and the availability of parts, but a skilled mechanic can typically complete the repair within a few hours.
10. Are there any preventive maintenance steps I can take to avoid OBDII code C0050:18 in the future?
Regularly inspecting your vehicle's wheel speed sensors, keeping an eye on the ABS warning light, and addressing any unusual noises or behaviors promptly can help prevent issues leading to this fault code.
Discuss the causes and fixes for C0050:18 OBDII Code
Code C0050:18 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
