C0050:08 Code - Right Rear Wheel Speed Sensor Circuit Performance Signal Invalid
Quick Answer
The wheel speeds are detected by active Wheel Speed Sensors (WSS) and encoder rings. Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0050:08 indicates Right Rear Wheel Speed Sensor Circuit Performance Signal Invalid.
- Common causes
- Common causes include Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted, Right Rear Wheel Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0050:08 Description
What are the Possible Causes of the DTC C0050:08?
- Faulty Right Rear Wheel Speed Sensor
- Right Rear Wheel Speed Sensor harness is open or shorted
- Right Rear Wheel Speed Sensor circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0050:08?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0050:08 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0050:08 code?
Need more information on how to fix the C0050:08 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0050:08 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0050:08 Code
1. What are the common symptoms of OBDII code C0050:08?
- Common symptoms include the ABS warning light illuminating on the dashboard, traction control issues, and potential loss of stability control.
2. What does the OBDII code C0050:08 indicate?
- This code indicates that there is an issue with the right rear wheel speed sensor circuit, specifically related to performance signal invalidity.
3. What are the possible causes of OBDII code C0050:08?
- Possible causes include a faulty right rear wheel speed sensor, damaged sensor wiring or connectors, sensor alignment issues, or problems with the ABS module.
4. How can I diagnose the issue related to OBDII code C0050:08?
- Diagnosis typically involves inspecting the right rear wheel speed sensor, checking the wiring and connectors for damage, and using a scan tool to monitor sensor data and detect abnormalities.
5. Can I still drive my vehicle with OBDII code C0050:08 present?
- While it is possible to drive the vehicle with this code, it is not recommended as it may affect the proper functioning of the ABS and stability control systems.
6. What are the repair options for OBDII code C0050:08?
- Repair options include replacing the right rear wheel speed sensor, repairing damaged wiring or connectors, realigning the sensor, or addressing any issues with the ABS module.
7. How much does it typically cost to fix OBDII code C0050:08?
- The cost of repairs can vary depending on the underlying issue and the labor rates in your area. Replacing a wheel speed sensor can range from $100 to $300, while addressing wiring or module issues may cost more.
8. Are there any DIY tips for addressing OBDII code C0050:08?
- DIY tips include checking the sensor and wiring for visible damage, cleaning connectors, and ensuring proper sensor alignment. However, complex diagnosis and repairs may require professional assistance.
9. How important is it to address OBDII code C0050:08 promptly?
- It is important to address this code promptly to ensure the proper functioning of the ABS and stability control systems, as driving with these systems compromised can affect vehicle safety.
10. Can OBDII code C0050:08 be a recurring issue?
- If the root cause of the issue is not properly addressed, OBDII code C0050:08 can recur. It is essential to diagnose and repair the issue thoroughly to prevent it from coming back.
Discuss the causes and fixes for C0050:08 OBDII Code
Code C0050:08 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.