AutoCodes – GMC – C0045 2017 GMC Sierra

C0045 2017 GMC Sierra Code - Left Rear Wheel Speed Sensor Circuit

Quick Answer

The wheel speeds are detected by active Wheel Speed Sensors (WSS) and encoder rings. Common causes include Faulty Left Rear Wheel Speed Sensor, Left Rear Wheel Speed Sensor harness is open or shorted, Left Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0045 2017 GMC Sierra indicates Left Rear Wheel Speed Sensor Circuit.
Common causes
Common causes include Faulty Left Rear Wheel Speed Sensor, Left Rear Wheel Speed Sensor harness is open or shorted, Left Rear Wheel Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 325
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 19, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C0045 2017 GMC Sierra Description

The wheel speeds are detected by active Wheel Speed Sensors (WSS) and encoder rings. The encoder ring consists of permanent magnets. Each Wheel Speed Senso receives ignition voltage from the Electronic Brake Control Module (EBCM) and provides an alternating current square wave signal to the electronic brake control module. As the wheel spins, the electronic brake control module uses the frequency of the square wave signal to calculate the wheel speed. The Diagnostic Trouble Code (DTC) will be set when an improper signal is detected on the wheel speed sensor ignition circuit.
OBDII Code C0045 2017 GMC Sierra - Left Rear Wheel Speed Sensor Circuit - AutoCodes.com
C0045 2017 GMC Sierra Code - Left Rear Wheel Speed Sensor Circuit

What are the Possible Causes of the DTC C0045 2017 GMC Sierra?

  • Faulty Left Rear Wheel Speed Sensor
  • Left Rear Wheel Speed Sensor harness is open or shorted
  • Left Rear Wheel Speed Sensor circuit poor electrical connection
  • Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0045 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0045 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0045 2017 GMC Sierra code?

Need more information on how to fix the C0045 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0045 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0045 2017 GMC Sierra Code

1. What are common symptoms of OBDII code C0045 on a 2017 GMC Sierra related to the Left Rear Wheel Speed Sensor Circuit?

The common symptoms include the ABS warning light illuminating on the dashboard, potential traction control system issues, and possible activation of the vehicle's stability control system.

2. What are the possible causes of OBDII code C0045 on a 2017 GMC Sierra?

Possible causes of this code include a faulty left rear wheel speed sensor, damaged wiring or connectors in the circuit, a failed ABS module, or issues with the wheel speed sensor tone ring.

3. How can I diagnose the OBDII code C0045 on my 2017 GMC Sierra?

To diagnose this code, you can use an OBDII scanner to retrieve the specific fault code. Additionally, inspect the left rear wheel speed sensor, check the wiring and connectors for damage, and perform a visual inspection of the tone ring for any issues.

4. Can I continue driving my 2017 GMC Sierra with OBDII code C0045 present?

While the vehicle may still be operable with this code, it is not recommended to ignore it. It is important to address the underlying issue promptly to ensure the proper functioning of the ABS and traction control systems.

5. How can I repair OBDII code C0045 on my 2017 GMC Sierra?

Repair options may include replacing the left rear wheel speed sensor, repairing or replacing damaged wiring or connectors, addressing any issues with the wheel speed sensor tone ring, or replacing the ABS module if necessary.

6. Are there any DIY tips for troubleshooting OBDII code C0045 on a 2017 GMC Sierra?

DIY tips may include checking for visible damage to the sensor and its wiring, ensuring proper connections, and inspecting the tone ring for debris or damage. However, complex diagnostics and repairs may require professional assistance.

7. Will OBDII code C0045 on a 2017 GMC Sierra affect vehicle performance?

While the code itself may not significantly impact performance, it can compromise the functionality of the ABS and traction control systems, affecting overall safety and stability during driving.

8. How long does it typically take to repair OBDII code C0045 on a 2017 GMC Sierra?

The repair time can vary depending on the exact cause of the code and the extent of the repairs needed. Simple fixes like sensor replacement may take less time, while complex issues could require more labor.

9. Can extreme weather conditions affect the occurrence of OBDII code C0045 on a 2017 GMC Sierra?

Extreme weather conditions, especially those causing moisture or corrosion, can potentially impact the wheel speed sensor circuit and lead to the triggering of this fault code.

10. Is it necessary to reset the OBDII system after repairing code C0045 on a 2017 GMC Sierra?

After completing the repairs, it is advisable to clear the OBDII system's memory using an OBDII scanner to reset the code and ensure proper functioning of the ABS and traction control systems.

Discuss the causes and fixes for C0045 2017 GMC Sierra OBDII Code

Code C0045 2017 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play