AutoCodes – Ford – C0014 Ford

C0014 Ford Code - Right Front Inlet Control

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Right Front Inlet Solenoid. Common causes include Faulty Right Front Inlet Solenoid, Right Front Inlet Solenoid harness is open or shorted, Right Front Inlet Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0014 Ford indicates Right Front Inlet Control.
Common causes
Common causes include Faulty Right Front Inlet Solenoid, Right Front Inlet Solenoid harness is open or shorted, Right Front Inlet Solenoid circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,363
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C0014 Ford Description

The Anti-Lock Brake System (ABS) Module monitors the Right Front Inlet Solenoid. The ABS Module sets the OBDII code when the Right Front Inlet Solenoid is not to factory specifications.
OBDII Code C0014 Ford - Right Front Inlet Control - AutoCodes.com
C0014 Ford Code - Right Front Inlet Control

What are the Possible Causes of the DTC C0014 Ford?

  • Faulty Right Front Inlet Solenoid
  • Right Front Inlet Solenoid harness is open or shorted
  • Right Front Inlet Solenoid circuit poor electrical connection

How to Fix the DTC C0014 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0014 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0014 Ford code?

Need more information on how to fix the C0014 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0014 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0014 Ford Code

1. What does the OBDII code C0014 indicate on a Ford vehicle?

The code C0014 on a Ford vehicle indicates an issue with the Right Front Inlet Control Circuit of the Anti-lock Brake System (ABS), pointing towards a malfunction in the brake fluid flow to the right front brake.

2. What are common symptoms of code C0014 on a Ford?

Common symptoms include the ABS light turning on, decreased braking performance, and sometimes the vehicle pulling to one side when braking.

3. What could cause the OBDII code C0014 to appear on a Ford?

Potential causes include a faulty ABS solenoid valve, blockages in the brake lines, damaged wiring or connectors in the ABS circuit, or a malfunctioning ABS control module.

4. How can I troubleshoot the C0014 code on my Ford?

Start by checking the ABS solenoid valve for any signs of damage or wear. Inspect the wiring and connectors for corrosion or breaks. Also, ensure that the brake lines are clear of any blockages or leaks.

5. What steps should be taken to clear the C0014 code from a Ford?

Repair or replace any faulty components such as the ABS solenoid or damaged wires, clear any blockages in the brake lines, and then reset the ABS system using an OBDII scanner. If the issue persists, consult a professional mechanic.

6. Is it safe to drive a Ford with the OBDII code C0014 showing?

Driving with code C0014 can compromise braking efficiency and safety, especially under emergency braking scenarios. It is advisable to address the issue promptly to ensure safe driving conditions.

7. What tools are required to diagnose the C0014 code on a Ford?

You will need an OBDII scanner to read the code and monitor live data, a multimeter for checking electrical connections, and basic hand tools to access the ABS components.

8. Can ignoring the C0014 code lead to other problems in a Ford vehicle?

Ignoring this code can lead to increased wear on the brake system, potentially causing premature failure of other brake components and compromising vehicle safety.

Discuss the causes and fixes for C0014 Ford OBDII Code

Code C0014 Ford comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play