B392B Buick Code - Seat Lumbar/Bolster Pump
Quick Answer
When a seat lumbar, bolster, or massage function is commanded ON, the Seat Bolster Memory Control Module applies battery voltage and a low side drive Pulse Width Modulated (PWM) signal through their respective control circuits to the seat lumbar/bolster pump. Common causes include Faulty Seat Lumbar/Bolster Pump, Seat Lumbar/Bolster Pump harness is open or shorted, Seat Lumbar/Bolster Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B392B Buick indicates Seat Lumbar/Bolster Pump.
- Common causes
- Common causes include Faulty Seat Lumbar/Bolster Pump, Seat Lumbar/Bolster Pump harness is open or shorted, Seat Lumbar/Bolster Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B392B Buick Description
What are the Possible Causes of the DTC B392B Buick?
- Faulty Seat Lumbar/Bolster Pump
- Seat Lumbar/Bolster Pump harness is open or shorted
- Seat Lumbar/Bolster Pump circuit poor electrical connection
- Faulty Seat Bolster Memory Control Module
How to Fix the DTC B392B Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B392B Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B392B Buick code?
Need more information on how to fix the B392B Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B392B Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B392B Buick Code
1. What are common symptoms of OBDII code B392B in a Buick related to the Seat Lumbar/Bolster Pump?
The common symptoms include malfunctioning lumbar or bolster support in the seat, unusual noises coming from the pump, or the pump not responding to adjustments.
2. What are some possible causes of OBDII code B392B related to the Seat Lumbar/Bolster Pump in a Buick?
Potential causes include a faulty seat lumbar/bolster pump motor, damaged wiring or connectors, low power supply to the pump, or a failed control module.
3. How can I diagnose the issue with the Seat Lumbar/Bolster Pump causing OBDII code B392B in my Buick?
You can diagnose the problem by checking the wiring and connectors for any damage, testing the power supply to the pump, and using a scan tool to communicate with the control module for error codes.
4. Is it safe to continue driving my Buick with OBDII code B392B related to the Seat Lumbar/Bolster Pump?
It is generally safe to drive the vehicle with this code as it primarily affects the functionality of the seat lumbar/bolster support system and does not pose a significant safety risk.
5. How can I repair OBDII code B392B in my Buick caused by an issue with the Seat Lumbar/Bolster Pump?
You can repair the issue by replacing the faulty lumbar/bolster pump motor, repairing any damaged wiring or connectors, ensuring proper power supply to the pump, or replacing the control module if necessary.
6. Can I reset OBDII code B392B related to the Seat Lumbar/Bolster Pump in my Buick without fixing the underlying issue?
While you can clear the code using a scan tool, it is recommended to address the root cause of the problem to prevent the code from reappearing and ensure the proper functionality of the seat lumbar/bolster support system.
7. Are there any temporary fixes or workarounds for OBDII code B392B in a Buick related to the Seat Lumbar/Bolster Pump?
Temporary fixes may include manually adjusting the lumbar or bolster support settings, but these are not permanent solutions and the underlying issue should still be addressed for proper functionality.
8. How much does it typically cost to repair OBDII code B392B caused by the Seat Lumbar/Bolster Pump issue in a Buick?
The cost of repair can vary depending on the specific cause of the problem, but it may involve parts and labor expenses ranging from $100 to $500 or more, depending on the extent of the repair needed.
9. Can I attempt to repair OBDII code B392B related to the Seat Lumbar/Bolster Pump in my Buick myself, or should I seek professional help?
If you have experience with automotive repairs and the necessary tools, you can attempt to repair the issue yourself. However, if you are unsure or uncomfortable with the repair process, it is recommended to seek professional help to ensure the problem is fixed correctly.
10. Are there any preventative maintenance tips to avoid encountering OBDII code B392B related to the Seat Lumbar/Bolster Pump in a Buick?
To prevent this issue, you can periodically check the functionality of the seat lumbar/bolster pump, avoid putting excessive pressure on the lumbar support, and address any unusual noises or malfunctions promptly to prevent further damage.
Discuss the causes and fixes for B392B Buick OBDII Code
Code B392B Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
