B390F Buick Code - Frontview Camera
Quick Answer
The video processing control module performs fault detection on itself and the cameras attached to it. Common causes include Faulty Frontview Camera, Frontview Camera harness is open or shorted, Frontview Camera circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B390F Buick indicates Frontview Camera.
- Common causes
- Common causes include Faulty Frontview Camera, Frontview Camera harness is open or shorted, Frontview Camera circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B390F Buick Description
What are the Possible Causes of the DTC B390F Buick?
- Faulty Frontview Camera
- Frontview Camera harness is open or shorted
- Frontview Camera circuit poor electrical connection
How to Fix the DTC B390F Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B390F 66 Frontview Camera Wrong Mounting Position
B390F 4B Frontview Camera Calibration Not Learned
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B390F Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B390F Buick code?
Need more information on how to fix the B390F Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B390F Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B390F Buick Code
1. What does the OBDII code B390F mean on a Buick?
The B390F code indicates an issue with the frontview camera system, typically related to a malfunction in communication, alignment, or calibration.
2. What are common symptoms of the B390F code on a Buick?
Symptoms include a non-functioning front camera, warnings or errors on the dash, and possible deactivation of driver-assist features like lane departure warning.
3. What causes the B390F code to appear in a Buick?
Common causes include a misaligned or damaged frontview camera, wiring or connector issues, or software glitches in the camera module.
4. Can a dirty windshield cause the B390F code on a Buick?
Yes, a dirty or obstructed windshield in front of the camera can interfere with its operation and potentially trigger the B390F code.
5. How do you diagnose the B390F code on a Buick?
Diagnosis involves scanning for codes, checking the frontview camera's physical condition, inspecting wiring and connectors, and verifying proper camera calibration.
6. Is the B390F code related to bad weather conditions?
Extreme weather, such as heavy rain, snow, or glare, can temporarily affect the frontview camera, but the code should clear once conditions improve if no hardware issue exists.
7. Can I drive my Buick with the B390F code active?
While the vehicle is typically drivable, safety features relying on the frontview camera may be disabled, so caution is advised.
8. How is the B390F code fixed on a Buick?
Repairs may involve cleaning or replacing the camera, fixing wiring issues, updating software, or recalibrating the camera system.
9. Does the B390F code always require a frontview camera replacement?
No, in many cases, the issue can be resolved with calibration, cleaning, or repairing connections rather than replacing the camera.
10. How much does it cost to repair the B390F code on a Buick?
The repair cost varies, with calibration or minor fixes costing $100–$300, while camera replacement can exceed $500.
Discuss the causes and fixes for B390F Buick OBDII Code
Code B390F Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
