AutoCodes – Generic – B3884:02

B3884:02 Code - Center High Mounted Stop Lamp Circuit Short to Ground

Quick Answer

The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Faulty Center High Mounted Stop Lamp, Center High Mounted Stop Lamp harness is open or shorted, Center High Mounted Stop Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3884:02 indicates Center High Mounted Stop Lamp Circuit Short to Ground.
Common causes
Common causes include Faulty Center High Mounted Stop Lamp, Center High Mounted Stop Lamp harness is open or shorted, Center High Mounted Stop Lamp circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 374
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 16, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B3884:02 Description

The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. The brake pedal position sensor provides an analog voltage signal that will increase as the brake pedal is applied. The Body Control Module (BCM) provides a low reference signal and a 5 V reference voltage to the brake pedal position sensor. When the variable signal reaches a voltage threshold indicating the brakes have been applied, the BCM energizes the stop lamp relay by applying a voltage to the stop lamp relay control circuit. When the stop lamp relay is energized, the relay switch contacts close, and battery voltage is applied to the Center High Mounted Stop Lamp (CHMSL) control circuit which illuminates the CHMSL. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a short to ground in the stop lamp relay control circuit.
OBDII Code B3884:02 - Center High Mounted Stop Lamp Circuit Short to Ground - AutoCodes.com
B3884:02 Code - Center High Mounted Stop Lamp Circuit Short to Ground

What are the Possible Causes of the DTC B3884:02?

  • Faulty Center High Mounted Stop Lamp
  • Center High Mounted Stop Lamp harness is open or shorted
  • Center High Mounted Stop Lamp circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B3884:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3884:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3884:02 code?

Need more information on how to fix the B3884:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3884:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3884:02 Code

No Frequently Asked Questions about B3884:02 Code found.

Discuss the causes and fixes for B3884:02 OBDII Code

Code B3884:02 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play