AutoCodes – Saturn – B3857 Saturn

B3857 Saturn Code - Incorrect Rollover Sensor Installed

Quick Answer

The inflatable restraint vehicle Rollover Sensor (ROS) utilizes the battery power supply and a bidirectional interface circuit. Common causes include Faulty Rollover Sensor, Rollover Sensor harness is open or shorted, Rollover Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3857 Saturn indicates Incorrect Rollover Sensor Installed.
Common causes: Common causes include Faulty Rollover Sensor, Rollover Sensor harness is open or shorted, Rollover Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 446

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3857 Saturn Description

The inflatable restraint vehicle Rollover Sensor (ROS) utilizes the battery power supply and a bidirectional interface circuit. The ROS modulates current on the interface to send ID, State of Health, and deployment commands to the inflatable restraint Sensing and Diagnostic Module (SDM). When the ignition is turned on the ROS responds by performing internal diagnostics and sending an ID to the SDM. The ROS continually communicates status messages to the SDM, which determines if a fault is present in the ROS circuit. If the fault is present, the SDM will set a Diagnostic Trouble Code (DTC).

OBDII Code B3857 Saturn - Incorrect Rollover Sensor Installed - AutoCodes.com — B3857 Saturn Code - Incorrect Rollover Sensor Installed

What does this mean?

What are the Possible Causes of the DTC B3857 Saturn?

Faulty Rollover Sensor
Rollover Sensor harness is open or shorted
Rollover Sensor circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B3857 Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3857 Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3857 Saturn code?

Need more information on how to fix the B3857 Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3857 Saturn code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3857 Saturn Code

1. What does the OBDII code B3857 mean on a Saturn?

The code B3857 indicates that the vehicle has detected an incorrect or incompatible rollover sensor installed.

2. What are the common symptoms of the B3857 code?

Symptoms may include an illuminated airbag warning light, a malfunctioning rollover protection system, and potential deactivation of safety features.

3. What causes the B3857 code to appear?

The code is typically caused by installing the wrong rollover sensor, a defective sensor, or a software mismatch in the vehicle's control module.

4. Can a faulty rollover sensor trigger the B3857 code?

Yes, a faulty or damaged rollover sensor can cause the code by sending incorrect data to the vehicle's control module.

5. How do I fix the B3857 code on my Saturn?

Fixing the code usually involves verifying the sensor part number, replacing the incorrect or faulty sensor, and possibly updating the vehicle's software.

6. Is it safe to drive a Saturn with the B3857 code active?

While the vehicle may still be drivable, the rollover protection system and certain airbag functions may not operate properly, reducing overall safety.

7. How do I know if the rollover sensor is compatible with my Saturn?

Check the part number on the sensor and compare it with the manufacturerâ€™s specifications for your vehicle model and year.

8. Will disconnecting the battery clear the B3857 code?

Disconnecting the battery may temporarily clear the code, but it will return if the underlying issue with the rollover sensor is not resolved.

9. Can a software update fix the B3857 code?

In some cases, if the issue is due to a software mismatch, updating the control module software may resolve the problem.

10. Do I need a professional to repair the B3857 code?

While some issues, like verifying part numbers, can be done at home, diagnosing and replacing the sensor or updating software may require professional tools and expertise.