B3707 Code - Front Washer Motor Input Low
Quick Answer
The Body Control Module (BCM) monitors the windshield washer pump control circuit. Common causes include Faulty Front Washer Motor, Front Washer Motor harness is open or shorted, Front Washer Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3707 indicates Front Washer Motor Input Low.
- Common causes
- Common causes include Faulty Front Washer Motor, Front Washer Motor harness is open or shorted, Front Washer Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3707 Description
Battery voltage for the windshield washer pump is supplied through the FRT WIPER 25 A fuse and windshield wiper washer switch. Grounding for the windshield washer pump is through the OFF position of the rear washer switch, when equipped. The Diagnostic Trouble Code (DTC) sets when the front windshield washer pump control circuit is shorted to ground for 2 minutes.
What are the Possible Causes of the DTC B3707?
- Faulty Front Washer Motor
- Front Washer Motor harness is open or shorted
- Front Washer Motor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B3707?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3707 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3707 code?
Need more information on how to fix the B3707 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3707 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B3707 Buick — Front Washer Motor Input Low
- B3707 Cadillac — Front Washer Motor Input Low
- B3707 Chevrolet — Front Washer Motor Input Low
- B3707 GMC — Front Washer Motor Input Low
- B3707 Saturn — Front Washer Motor Input Low
Frequently Asked Questions about B3707 Code
1. What does the OBDII code B3707 mean?
B3707 indicates that the front washer motor input is reading a low voltage, which may suggest an issue with the washer motor circuit or its components.
2. What are the common symptoms of code B3707?
Symptoms include the windshield washer system not working, inability to spray washer fluid, or the washer motor being completely unresponsive.
3. What causes the B3707 code to trigger?
Common causes include a faulty washer motor, damaged wiring or connectors, a blown fuse, or a malfunctioning washer switch.
4. Can a bad fuse cause the B3707 code?
Yes, a blown fuse in the washer motor circuit can cause low input voltage, triggering the B3707 code.
5. How do I diagnose the B3707 code?
Check the fuse, inspect the washer motor wiring and connectors for damage, test the washer motor for proper operation, and verify the washer switch's functionality.
6. Can I still drive my vehicle with the B3707 code active?
Yes, the vehicle is safe to drive, but you may lose functionality of the windshield washer system, which can impair visibility in certain conditions.
7. How do I fix the B3707 error code?
Repairs may include replacing the front washer motor, repairing or replacing damaged wiring or connectors, or replacing a faulty washer switch or fuse.
8. How much does it cost to fix the B3707 code?
Repair costs can range from $50 to $200, depending on whether you need to replace the washer motor, repair wiring, or replace other components.
9. Can I reset the B3707 code without fixing the issue?
You can clear the code with an OBDII scanner, but if the underlying issue isn’t addressed, the code will likely return.
10. What tools are needed to troubleshoot the B3707 code?
You'll need a multimeter to test voltage, an OBDII scanner to read and clear codes, and basic tools to inspect and repair wiring or replace components.
Discuss the causes and fixes for B3707 OBDII Code
Code B3707 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.