B367F Code - Roof Stowed Ready to Latch Sensor Circuit
Quick Answer
S13 is the Folding Top Front Location Pin Position switch. Common causes include Faulty Roof Stowed Ready to Latch Sensor, Roof Stowed Ready to Latch Sensor harness is open or shorted, Roof Stowed Ready to Latch Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B367F indicates Roof Stowed Ready to Latch Sensor Circuit.
- Common causes
- Common causes include Faulty Roof Stowed Ready to Latch Sensor, Roof Stowed Ready to Latch Sensor harness is open or shorted, Roof Stowed Ready to Latch Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B367F Description
What are the Possible Causes of the DTC B367F?
- Faulty Roof Stowed Ready to Latch Sensor
- Roof Stowed Ready to Latch Sensor harness is open or shorted
- Roof Stowed Ready to Latch Sensor circuit poor electrical connection
- Faulty Folding Top Control (FTC) Module
How to Fix the DTC B367F?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B367F 59 Roof Stowed Ready to Latch Sensor Circuit circuit/component protection time out
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B367F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B367F code?
Need more information on how to fix the B367F code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B367F code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B367F Chevrolet — Roof Stowed Ready to Latch Sensor Circuit
- B367F Pontiac — Roof Stowed Ready to Latch Sensor Circuit
Frequently Asked Questions about B367F Code
1. What are the common symptoms of OBDII code B367F Roof Stowed Ready to Latch Sensor Circuit?
- Common symptoms include a malfunctioning convertible roof that fails to stow properly or latch securely.
2. What can cause the OBDII code B367F to trigger?
- The code B367F can be triggered by issues with the roof stowed ready to latch sensor circuit, such as sensor malfunctions, wiring problems, or sensor circuit faults.
3. How can I diagnose the cause of OBDII code B367F related to the roof sensor circuit?
- To diagnose the issue, you can start by checking the wiring connections, inspecting the sensor for physical damage, and using a diagnostic tool to read the sensor data.
4. Are there any DIY repair tips for fixing OBDII code B367F related to the roof sensor circuit?
- DIY repair tips may include checking and cleaning the sensor connections, replacing damaged wiring, or resetting the sensor system through the vehicle's onboard computer.
5. Can driving with the OBDII code B367F present cause any further damage to the vehicle?
- Continued driving with the B367F code may lead to further issues with the convertible roof mechanism, potentially affecting its operation and safety.
6. Is it safe to manually operate the convertible roof if the B367F code is triggered?
- It is not recommended to manually operate the convertible roof if the B367F code is present, as this can potentially exacerbate the issue or cause damage to the system.
7. How much does it typically cost to repair OBDII code B367F related to the roof sensor circuit at a mechanic or dealership?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can resetting the OBDII system clear the B367F code temporarily?
- Resetting the OBDII system may temporarily clear the B367F code, but if the underlying issue with the roof sensor circuit is not addressed, the code is likely to reappear.
9. Are there any preventive maintenance steps to avoid encountering OBDII code B367F in the future?
- Regularly inspecting and maintaining the convertible roof system, checking for loose connections or sensor issues, can help prevent the recurrence of the B367F code.
10. Will the B367F code prevent the vehicle from passing an emissions test?
- The B367F code itself may not directly affect emissions, but if left unresolved, it can lead to other issues that may impact the vehicle's overall performance and emissions output.
Discuss the causes and fixes for B367F OBDII Code
Code B367F comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
