B3650 2014 GMC Sierra Code - High Beam Request Signal Circuit Performance Signal Invalid
Quick Answer
When the low beam headlamps are on and the turn signal/multifunction switch is placed in the high beam position, ground is applied to the Body Control Module (BCM) through the high beam signal circuit. Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3650 2014 GMC Sierra indicates High Beam Request Signal Circuit Performance Signal Invalid.
- Common causes
- Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3650 2014 GMC Sierra Description
What are the Possible Causes of the DTC B3650 2014 GMC Sierra?
- Faulty Turn Signal/Multifunction Switch
- Turn Signal/Multifunction Switch harness is open or shorted
- Turn Signal/Multifunction Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B3650 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3650 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3650 2014 GMC Sierra code?
Need more information on how to fix the B3650 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3650 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3650 2014 GMC Sierra Code
1. What does the OBDII code B3650 mean for a 2014 GMC Sierra?
The code B3650 indicates an issue with the High Beam Request Signal Circuit, where the signal is invalid or not performing as expected.
2. What are common symptoms of the B3650 code in a 2014 GMC Sierra?
Symptoms may include malfunctioning high beams, inability to switch between low and high beams, or a high beam indicator that doesn’t work properly.
3. What causes the B3650 code in a GMC Sierra?
Possible causes include a faulty high beam switch, damaged wiring or connectors in the circuit, or a malfunctioning Body Control Module (BCM).
4. Can a blown fuse cause the B3650 code in a 2014 GMC Sierra?
Yes, a blown fuse related to the high beam circuit can potentially trigger the B3650 code.
5. How do I diagnose the B3650 code on my 2014 GMC Sierra?
Start by inspecting the high beam switch, wiring, and connectors for damage or corrosion. Test the circuit for continuity and check the BCM for proper function.
6. Is the B3650 code dangerous to drive with?
While it may not immediately impact drivability, it can compromise nighttime visibility, making it unsafe to drive in low-light conditions.
7. Can software issues in the BCM cause the B3650 code?
Yes, if the BCM software is corrupted or outdated, it could fail to process the high beam request signal correctly, triggering the code.
8. How do I fix the B3650 code in my GMC Sierra?
Repairs may include replacing the high beam switch, repairing damaged wiring, or reprogramming or replacing the BCM.
9. Are special tools needed to fix the B3650 code?
You may need a multimeter to test wiring and an automotive scan tool to diagnose and clear the code after repairs.
10. How much does it cost to repair the B3650 code on a 2014 GMC Sierra?
Repair costs vary, but diagnosing and fixing wiring issues may cost $100-$300, while BCM replacement or reprogramming could exceed $500.
Discuss the causes and fixes for B3650 2014 GMC Sierra OBDII Code
Code B3650 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
