B3606 2018 Chevrolet Silverado Code - Adjustable Pedal Position Sensor Circuit
Quick Answer
The Driver Seat Memory Control Module monitors the location of the adjustable pedals using the Adjustable Pedal Position Sensor. Common causes include Faulty Adjustable Pedal Position Sensor, Adjustable Pedal Position Sensor harness is open or shorted, Adjustable Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3606 2018 Chevrolet Silverado indicates Adjustable Pedal Position Sensor Circuit.
- Common causes
- Common causes include Faulty Adjustable Pedal Position Sensor, Adjustable Pedal Position Sensor harness is open or shorted, Adjustable Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3606 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC B3606 2018 Chevrolet Silverado?
- Faulty Adjustable Pedal Position Sensor
- Adjustable Pedal Position Sensor harness is open or shorted
- Adjustable Pedal Position Sensor circuit poor electrical connection
- Faulty Driver Seat Memory Control Module
How to Fix the DTC B3606 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B3606:06 Adjustable Pedal Position Sensor Circuit Low Voltage/Open
B3606:5A Adjustable Pedal Position Sensor Circuit Not Plausible
B3606:61 Adjustable Pedal Position Sensor Circuit Stuck
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3606 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3606 2018 Chevrolet Silverado code?
Need more information on how to fix the B3606 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3606 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3606 2018 Chevrolet Silverado Code
1. What does the OBDII code B3606 mean on a 2018 Chevrolet Silverado?
B3606 indicates a problem with the Adjustable Pedal Position Sensor Circuit, which monitors the position of the adjustable pedals.
2. What are the symptoms of code B3606 in a 2018 Chevrolet Silverado?
Common symptoms include non-functioning adjustable pedals, a stored trouble code, warning lights on the dashboard, and potentially limited pedal adjustment responsiveness.
3. What causes the B3606 code to appear in a 2018 Chevrolet Silverado?
The code can be triggered by a faulty pedal position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning control module.
4. Can I drive my 2018 Chevrolet Silverado with the B3606 code?
Yes, the truck is generally still drivable, but the adjustable pedal feature may not work, and ignoring the issue could lead to more significant problems over time.
5. How do I diagnose the B3606 code in my 2018 Chevrolet Silverado?
Start by using a scan tool to verify the code, then inspect the pedal position sensor, its wiring, and connectors for damage or wear. Check the sensor's signal with a multimeter if needed.
6. How can I fix the B3606 code on a 2018 Chevrolet Silverado?
Repairs may involve replacing a damaged pedal position sensor, repairing or replacing faulty wiring or connectors, or reprogramming/updating the control module if necessary.
7. How much does it cost to repair the B3606 code on a 2018 Chevrolet Silverado?
The cost can range from $100 to $300, depending on whether the issue is with the sensor, wiring, or control module.
8. Can a dirty or misaligned pedal assembly cause the B3606 code?
Yes, debris or misalignment in the pedal assembly can interfere with the sensor's operation and trigger the code.
9. Does the B3606 code require reprogramming the control module in my Silverado?
Not always, but if the control module is at fault or requires an update after repairs, reprogramming may be necessary.
10. How can I prevent the B3606 code in the future?
Regularly inspect and maintain the pedal assembly, sensor wiring, and connectors to ensure they stay clean, secure, and free of damage.
Discuss the causes and fixes for B3606 2018 Chevrolet Silverado OBDII Code
Code B3606 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
