B356A Code - Vehicle Direction Warning Switch Circuit
Quick Answer
The lane departure warning system is controlled by the Active Safety Control Module. Common causes include Faulty Vehicle Direction Warning Switch, Vehicle Direction Warning Switch harness is open or shorted, Vehicle Direction Warning Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B356A indicates Vehicle Direction Warning Switch Circuit.
- Common causes
- Common causes include Faulty Vehicle Direction Warning Switch, Vehicle Direction Warning Switch harness is open or shorted, Vehicle Direction Warning Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B356A Description
When the Frontview Camera module is operating and can detect the lane markings, the Frontview Camera module will request via serial data communications that the instrument panel cluster illuminate the green lane departure ready–to–assist indicator. If the Frontview Camera module detects that the vehicle has crossed a lane marking without the turn signal being used, the module will request that the instrument cluster flash the yellow lane departure warning indicator. An audible warning may also sound three times, or the haptic seat (if equipped) may pulse when the yellow Instrument Cluster indicator is flashing. The driver can select between audible or haptic alerts in the vehicle personalization menu. The Diagnostic Trouble Code (DTC) will be set when the Active Safety Control Module has detected a short to ground, short to voltage, or an open/high resistance for more than 10 s.
What are the Possible Causes of the DTC B356A?
- Faulty Vehicle Direction Warning Switch
- Vehicle Direction Warning Switch harness is open or shorted
- Vehicle Direction Warning Switch circuit poor electrical connection
- Faulty Frontview Camera Module
- Faulty Active Safety Control Module
How to Fix the DTC B356A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B356A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B356A code?
Need more information on how to fix the B356A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B356A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B356A Buick — Vehicle Direction Warning Switch Circuit
- B356A Cadillac — Vehicle Direction Warning Switch Circuit
- B356A Chevrolet — Vehicle Direction Warning Switch Circuit
- B356A GMC — Vehicle Direction Warning Switch Circuit
Frequently Asked Questions about B356A Code
1. What does the OBDII code B356A mean?
B356A indicates an issue with the vehicle direction warning switch circuit, which may involve a malfunction or fault in the wiring, switches, or related components.
2. What are the common symptoms of code B356A?
Symptoms may include a non-functional direction warning system, warning lights on the dashboard, or failure of specific features like lane departure warning.
3. What causes the B356A code to appear?
Common causes include damaged wiring, a faulty direction warning switch, a malfunctioning control module, or a loose electrical connection.
4. Can I drive my car with the B356A code active?
While the vehicle may still be drivable, safety features like direction or lane warnings may not work properly, increasing the risk in certain driving conditions.
5. How is code B356A diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connections, test the direction warning switch, and potentially check the control module for faults.
6. What tools are needed to repair the B356A code?
Tools may include a diagnostic scan tool, a multimeter for electrical testing, and basic hand tools for inspecting and repairing wiring or switch components.
7. How can I fix the B356A code?
Repairs may involve replacing a damaged direction warning switch, repairing or replacing faulty wiring, or reprogramming/updating the control module if necessary.
8. Is the B356A code specific to certain vehicles?
This code can appear on various vehicles equipped with advanced driver assistance systems (ADAS), but the exact diagnostic and repair steps may vary by manufacturer.
9. How much does it cost to repair a B356A code issue?
The repair cost depends on the root cause, ranging from $50-$150 for minor wiring repairs to $200-$500 for component replacement, excluding labor.
10. Can I prevent the B356A code from occurring?
Routine maintenance, such as inspecting electrical connections and avoiding physical damage to switches or wiring, can help prevent this code from appearing.
Discuss the causes and fixes for B356A OBDII Code
Code B356A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
