AutoCodes – Cadillac – B3060 Cadillac

B3060 Cadillac Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 Cadillac indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,530

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 Cadillac Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 Cadillac - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 Cadillac Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 Cadillac?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 Cadillac code?

Need more information on how to fix the B3060 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 Cadillac Code

1. What does the OBDII code B3060 mean on a Cadillac?

The B3060 code indicates an "Unprogrammed Transponder Identification Code Received Malfunction," which means the vehicle's anti-theft system has detected an unprogrammed or incorrect key transponder.

2. What are the symptoms of the B3060 code on a Cadillac?

Common symptoms include the engine not starting, security warning lights on the dashboard, or the car cranking but failing to start.

3. What causes the B3060 code to appear on a Cadillac?

The code is typically caused by an unprogrammed or defective key, interference from other electronic devices, a malfunctioning transponder receiver, or a failure in the vehicle's anti-theft system.

4. Can I still drive my Cadillac with the B3060 code active?

No, you likely wonâ€™t be able to drive the car because the anti-theft system may prevent the engine from starting.

5. How do I fix the B3060 code on a Cadillac?

The issue can often be resolved by programming or reprogramming the key using specialized diagnostic equipment or replacing the key if it is damaged. In some cases, the transponder receiver may need to be repaired or replaced.

6. Do I need to take my Cadillac to a dealer to fix the B3060 code?

While a dealer can fix the issue, many qualified locksmiths or automotive shops with the right tools can program transponder keys and diagnose anti-theft system issues.

7. How can I prevent the B3060 code from occurring again?

Use only authorized and programmed keys for your Cadillac, avoid exposing keys to strong electromagnetic fields, and ensure your key is not physically damaged.

8. Can a dead key fob battery cause the B3060 code?

No, a dead key fob battery typically prevents remote functions but does not trigger the B3060 code. This code is specific to transponder key programming.

9. How much does it cost to fix the B3060 code on a Cadillac?

Costs can vary depending on the issue; programming a new key may cost $100-$300, while replacing a faulty transponder receiver or module could cost more.

10. Can I clear the B3060 code without fixing the issue?

You can clear the code temporarily with an OBDII scanner, but it will likely return unless the root cause is addressed.